Tarmac driveway resurfacing in Liversedge
For tarmac resurfacing jobs in Liversedge, we measure the area, check the ground and the falls, and give you an itemised price you can compare line by line with any other quote.

Tarmac resurfacing prices in Liversedge
For Liversedge, we apply the Yorkshire and the Humber rate, about 4% below our UK midpoint. Your survey turns these ranges into a fixed price.
| Item | Guide price (inc VAT) |
|---|---|
| Tarmac resurfacing over a sound existing base | £24–£43 per m² |
| Example: 30 m² drive | £790–£1,450 |
| Example: 50 m² drive | £1,200–£2,150 |
| Example: 80 m² drive | £1,900–£3,450 |
As a 2026 guide in Liversedge, tarmac resurfacing work runs at about £24–£43 per m² including VAT, so a 80 m² drive is roughly £1,900–£3,450. Guide only; the survey confirms a fixed price.
What the price covers
A new tack-coated surface course over a drive whose base is still sound: less digging, lower cost.
- Cut out and patch failed areas before overlaying
- Plane or cut back at thresholds, kerbs and covers so levels still work
- Weed treatment and a clean surface
- Bond (tack) coat sprayed to glue the new layer to the old
- Edges sealed and joints to existing surfaces cut neatly
Liversedge: the local details
The key facts for Liversedge. Smaller towns such as Liversedge are surveyed alongside nearby jobs in West Yorkshire.
- Postcodes
- WF15
- Area
- West Yorkshire
- Nearest towns
- Heckmondwike (1 mile), Cleckheaton (2 miles), Mirfield (2 miles), Batley (2 miles)
- Pricing
- Yorkshire and the Humber, about 4% below our UK midpoint
- Kerb approvals
- The highway authority
Close to Liversedge: Heckmondwike, Cleckheaton, Mirfield, Batley, Dewsbury.
Layer by layer
Do I need permission in Liversedge?
In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.
Your questions answered
Can I get a free survey in Liversedge?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
How quickly can work start in Liversedge?
Often 1–2 days for a typical drive. We book Liversedge surveys alongside other jobs in West Yorkshire, and give you dates once the specification is agreed.
Do you work in my part of Liversedge?
We cover Liversedge including WF15, and nearby Heckmondwike, Cleckheaton, Mirfield.
Do I need permission for tarmac resurfacing in Liversedge?
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).
Also in Liversedge
- Private and access road surfacing
- Car park resurfacing
- Tar and chip driveways
- Red tarmac driveways
- Tarmac paths and footpaths
- Permeable tarmac driveways
- Everything in Liversedge
Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Liversedge.
Tarmac driveway resurfacing in Liversedge: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED