Driveways and paths · West Yorkshire

Tarmac driveway resurfacing in Bingley

Every tarmac resurfacing job we price in Bingley comes with a written specification, so the dig depth, sub-base, binder course and surface course are on paper before anything is agreed.

BINGLEY GUIDE£24–£43 per m² inc VAT
Hot tarmac being spread with a lute rake on a driveway, typical of tarmac resurfacing work

How much should I budget in Bingley?

These Bingley guide prices reflect rates in Yorkshire and the Humber, about 4% below our UK midpoint.

ItemGuide price (inc VAT)
Tarmac resurfacing over a sound existing base£24–£43 per m²
Example: 30 m² drive£790–£1,450
Example: 50 m² drive£1,200–£2,150
Example: 80 m² drive£1,900–£3,450

As a 2026 guide in Bingley, tarmac resurfacing work runs at about £24–£43 per m² including VAT, so a 50 m² drive is roughly £1,200–£2,150. Guide only; the survey confirms a fixed price.

How it is built

New surface course25–40 mm AC 6 or AC 10Bond coatbitumen emulsion tack coatExisting driverepaired where failedExisting basemust be soundINDICATIVE CROSS-SECTION · NOT TO SCALE

Where we work in and around Bingley

The key facts for Bingley. We cover Bingley by grouping surveys with nearby West Yorkshire jobs; Leeds is 12 miles away.

Postcodes
BD16, BD15, BD13
Area
West Yorkshire
Nearest towns
Baildon (2 miles), Keighley (3 miles), Shipley (3 miles), Bradford (5 miles)
Pricing
Yorkshire and the Humber, about 4% below our UK midpoint
Kerb approvals
The highway authority

Close to Bingley: Baildon, Keighley, Shipley, Bradford, Guiseley.

What we do on tarmac resurfacing

A new tack-coated surface course over a drive whose base is still sound: less digging, lower cost.

  • Survey of the existing base: sinking, rutting, loose edges and drainage
  • Cut out and patch failed areas before overlaying
  • Weed treatment and a clean surface
  • Bond (tack) coat sprayed to glue the new layer to the old
  • New surface course, typically 25–40 mm, laid hot and rolled

Do I need permission in Bingley?

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

Bingley: common questions

What approvals apply in Bingley?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Can I get a free survey in Bingley?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How long will the work take at my Bingley property?

Often 1–2 days for a typical drive. We book Bingley surveys alongside other jobs in West Yorkshire, and give you dates once the specification is agreed.

Do you cover all of Bingley?

We cover Bingley including BD16, BD15, BD13, and nearby Baildon, Keighley, Shipley.

Also in Bingley

Ready for a price in Bingley? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

Tarmac driveway resurfacing in Bingley: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price