Tarmac driveway resurfacing in Wolverhampton
Planning tarmac resurfacing in Wolverhampton? We'll measure up, look at the edges and drainage, and set the specification out in writing before you commit to anything.

Tarmac resurfacing prices in Wolverhampton
Guide prices below are for Wolverhampton, adjusted for the West Midlands, where surfacing rates run in line with our UK midpoint.
| Item | Guide price (inc VAT) |
|---|---|
| Tarmac resurfacing over a sound existing base | £25–£45 per m² |
| Example: 30 m² drive | £830–£1,500 |
| Example: 50 m² drive | £1,250–£2,250 |
| Example: 80 m² drive | £2,000–£3,600 |
As a 2026 guide in Wolverhampton, tarmac resurfacing work runs at about £25–£45 per m² including VAT, so a 30 m² drive is roughly £830–£1,500. Guide only; the survey confirms a fixed price.
Do I need permission in Wolverhampton?
In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).
What we do on tarmac resurfacing
Tarmac resurfacing, or an overlay, means cleaning and repairing an existing drive, spraying a bond coat and laying a new surface course of about 25–40 mm on top, without digging out the base.
- Survey of the existing base: sinking, rutting, loose edges and drainage
- Plane or cut back at thresholds, kerbs and covers so levels still work
- Weed treatment and a clean surface
- New surface course, typically 25–40 mm, laid hot and rolled
- Edges sealed and joints to existing surfaces cut neatly
Covering Wolverhampton
The key facts for Wolverhampton. Wolverhampton is one of the bigger places we cover in the West Midlands, so survey slots come round regularly.
- Postcodes
- WV1, WV2, WV3, WV4, WV6, WV9, WV8
- Area
- West Midlands
- Nearest towns
- Wednesfield (2 miles), Willenhall (3 miles), Tipton (5 miles), Wednesbury (5 miles)
- Pricing
- West Midlands, in line with our UK midpoint
- Kerb approvals
- The highway authority
The same service is available in Wednesfield, Willenhall, Tipton, Wednesbury, Bloxwich.
Questions about tarmac resurfacing jobs in Wolverhampton
What is the price of tarmac resurfacing in Wolverhampton?
As a 2026 guide in Wolverhampton, tarmac resurfacing work runs at about £25–£45 per m² including VAT, so a 30 m² drive is roughly £830–£1,500. Edging, drainage and a dropped kerb are priced separately where needed.
Do I need permission for tarmac resurfacing in Wolverhampton?
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).
Will someone visit before I get a fixed price in Wolverhampton?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
How quickly can work start in Wolverhampton?
Often 1–2 days for a typical drive. We book Wolverhampton surveys alongside other jobs in the West Midlands, and give you dates once the specification is agreed.
Other work in Wolverhampton
- Private and access road surfacing
- Tar and chip driveways
- Tarmac driveway repairs
- Car park resurfacing
- Front garden to tarmac driveway
- Car park and yard repairs
- Everything in Wolverhampton
Ready for a price in Wolverhampton? Use the guide price tool or send the form, and we'll arrange a visit.
Tarmac driveway resurfacing in Wolverhampton: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED