Tarmac driveway resurfacing in Wellington
A good tarmac resurfacing job in Wellington looks the same as a poor one on the day it is laid. The difference shows a few winters later, which is why our quotes list what goes underneath.

Tarmac resurfacing prices in Wellington
These Wellington guide prices reflect rates in the West Midlands, in line with our UK midpoint.
| Item | Guide price (inc VAT) |
|---|---|
| Tarmac resurfacing over a sound existing base | £25–£45 per m² |
| Example: 30 m² drive | £830–£1,500 |
| Example: 50 m² drive | £1,250–£2,250 |
| Example: 80 m² drive | £2,000–£3,600 |
As a 2026 guide in Wellington, tarmac resurfacing work runs at about £25–£45 per m² including VAT, so a 30 m² drive is roughly £830–£1,500. Guide only; the survey confirms a fixed price.
Where we work in and around Wellington
What applies in Wellington. We cover Wellington by grouping surveys with nearby Shropshire jobs; Telford is 3 miles away.
- Postcodes
- TF1, TF5, TF6
- Area
- Shropshire
- Nearest towns
- Hadley (1 mile), Telford (3 miles), Newport (Shropshire) (7 miles), Ryton (9 miles)
- Pricing
- West Midlands, in line with our UK midpoint
- Kerb approvals
- The highway authority
We also cover nearby Hadley, Telford, Newport (Shropshire), Ryton, Shrewsbury.
Rules that apply in Wellington
In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).
The build-up we price
What we do on tarmac resurfacing
A new tack-coated surface course over a drive whose base is still sound: less digging, lower cost.
- Cut out and patch failed areas before overlaying
- Weed treatment and a clean surface
- Bond (tack) coat sprayed to glue the new layer to the old
- New surface course, typically 25–40 mm, laid hot and rolled
- Edges sealed and joints to existing surfaces cut neatly
Questions about tarmac resurfacing jobs in Wellington
What is the price of tarmac resurfacing in Wellington?
As a 2026 guide in Wellington, tarmac resurfacing work runs at about £25–£45 per m² including VAT, so a 30 m² drive is roughly £830–£1,500. Edging, drainage and a dropped kerb are priced separately where needed.
What approvals apply in Wellington?
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).
How long will the work take at my Wellington property?
Often 1–2 days for a typical drive. We book Wellington surveys alongside other jobs in Shropshire, and give you dates once the specification is agreed.
Which Wellington postcodes do you cover?
We cover Wellington including TF1, TF5, TF6, and nearby Hadley, Telford, Newport (Shropshire).
Also in Wellington
- Front garden to tarmac driveway
- Car park resurfacing
- Car park surfacing
- Tarmac paths and footpaths
- New tarmac driveways
- Tar and chip driveways
- Everything in Wellington
Tell us what you have in mind for Wellington and we'll book a survey and put the specification in writing.
Tarmac driveway resurfacing in Wellington: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED