Driveways and paths · Mid Glamorgan

Tarmac driveway resurfacing in Tonyrefail

Homeowners in Tonyrefail ask us about tarmac resurfacing jobs for the same reason: a surface that stays flat, drains properly and still looks tidy in ten years. That comes down to the build underneath.

TONYREFAIL GUIDE£24–£43 per m² inc VAT
Hot tarmac being spread with a lute rake on a driveway, typical of tarmac resurfacing work

Tarmac resurfacing prices in Tonyrefail

Guide prices below are for Tonyrefail, adjusted for Wales, where surfacing rates run about 5% below our UK midpoint.

ItemGuide price (inc VAT)
Tarmac resurfacing over a sound existing base£24–£43 per m²
Example: 30 m² drive£780–£1,400
Example: 50 m² drive£1,200–£2,150
Example: 80 m² drive£1,900–£3,400

As a 2026 guide in Tonyrefail, tarmac resurfacing work runs at about £24–£43 per m² including VAT, so a 30 m² drive is roughly £780–£1,400. Guide only; the survey confirms a fixed price.

What the price covers

Tarmac resurfacing, or an overlay, means cleaning and repairing an existing drive, spraying a bond coat and laying a new surface course of about 25–40 mm on top, without digging out the base.

  • Survey of the existing base: sinking, rutting, loose edges and drainage
  • Cut out and patch failed areas before overlaying
  • Plane or cut back at thresholds, kerbs and covers so levels still work
  • Bond (tack) coat sprayed to glue the new layer to the old
  • New surface course, typically 25–40 mm, laid hot and rolled

Layer by layer

New surface course25–40 mm AC 6 or AC 10Bond coatbitumen emulsion tack coatExisting driverepaired where failedExisting basemust be soundINDICATIVE CROSS-SECTION · NOT TO SCALE

Planning and kerb rules for Tonyrefail

In Wales, a new hard surface in front of a house is permitted development only if it is porous or drains to a permeable area within the property; repairing or replacing up to 5 m² of existing hardstanding is allowed without meeting that condition. Separately, since January 2019, construction covering 100 m² or more that affects drainage generally needs approval from the council's SuDS Approving Body (SAB) before work starts, even where planning permission is not needed. Larger drives, shared surfaces and car parks often reach that threshold. Any new or widened crossing over the pavement needs approval from the council as highway authority.

Where we work in and around Tonyrefail

The key facts for Tonyrefail. We cover Tonyrefail by grouping surveys with nearby Mid Glamorgan jobs; Rhondda is 5 miles away.

Postcodes
CF39
Area
Mid Glamorgan
Nearest towns
Tonypandy (3 miles), Llantrisant (4 miles), Pontypridd (4 miles), Pencoed (5 miles)
Pricing
Wales, about 5% below our UK midpoint
Kerb approvals
The council

Close to Tonyrefail: Tonypandy, Llantrisant, Pontypridd, Pencoed, Rhondda.

Tonyrefail: common questions

Is the survey in Tonyrefail free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do I need permission for tarmac resurfacing in Tonyrefail?

In Wales, new front hardstanding should be porous or drain to a permeable area within the property, and work covering 100 m² or more with drainage effects usually needs SAB approval first. Dropped kerbs are approved by the council as highway authority.

How quickly can work start in Tonyrefail?

Often 1–2 days for a typical drive. We book Tonyrefail surveys alongside other jobs in Mid Glamorgan, and give you dates once the specification is agreed.

Do you work in my part of Tonyrefail?

We cover Tonyrefail including CF39, and nearby Tonypandy, Llantrisant, Pontypridd.

More we do in Tonyrefail

Tell us what you have in mind for Tonyrefail and we'll book a survey and put the specification in writing.

Free survey for new surfacing

Tarmac driveway resurfacing in Tonyrefail: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price