Tarmac driveway resurfacing in Margate

How much should I budget in Margate?

Guide prices below are for Margate, adjusted for the South East, where surfacing rates run about 10% above our UK midpoint.

Item	Guide price (inc VAT)
Tarmac resurfacing over a sound existing base	£28–£50 per m²
Example: 30 m² drive	£910–£1,650
Example: 50 m² drive	£1,400–£2,500
Example: 80 m² drive	£2,200–£3,950

As a 2026 guide in Margate, tarmac resurfacing work runs at about £28–£50 per m² including VAT, so a 50 m² drive is roughly £1,400–£2,500. Guide only; the survey confirms a fixed price.

Covering Margate

Margate at a glance. We reach Margate on our Kent survey days; Maidstone is 38 miles away.

Postcodes: CT9, CT8, CT7
Area: Kent
Nearest towns: Broadstairs (3 miles), Ramsgate (3 miles), Deal (11 miles), Herne Bay (11 miles)
Pricing: South East, about 10% above our UK midpoint
Kerb approvals: The highway authority

Close to Margate: Broadstairs, Ramsgate, Deal, Herne Bay, Canterbury.

What we do on tarmac resurfacing

A new tack-coated surface course over a drive whose base is still sound: less digging, lower cost.

Survey of the existing base: sinking, rutting, loose edges and drainage
Cut out and patch failed areas before overlaying
Plane or cut back at thresholds, kerbs and covers so levels still work
Weed treatment and a clean surface
Edges sealed and joints to existing surfaces cut neatly

Planning and kerb rules for Margate

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

Layer by layer

Your questions answered

How much does tarmac resurfacing cost in Margate?

As a 2026 guide in Margate, tarmac resurfacing work runs at about £28–£50 per m² including VAT, so a 50 m² drive is roughly £1,400–£2,500. Edging, drainage and a dropped kerb are priced separately where needed.

How long will the work take at my Margate property?

Often 1–2 days for a typical drive. We book Margate surveys alongside other jobs in Kent, and give you dates once the specification is agreed.

Do I need permission for tarmac resurfacing in Margate?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Can I get a free survey in Margate?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Other work in Margate

Tell us what you have in mind for Margate and we'll book a survey and put the specification in writing.