Tarmac driveway resurfacing in Alton

Tarmac resurfacing prices in Alton

Guide prices below are for Alton, adjusted for the South East, where surfacing rates run about 10% above our UK midpoint.

Item	Guide price (inc VAT)
Tarmac resurfacing over a sound existing base	£28–£50 per m²
Example: 30 m² drive	£910–£1,650
Example: 50 m² drive	£1,400–£2,500
Example: 80 m² drive	£2,200–£3,950

As a 2026 guide in Alton, tarmac resurfacing work runs at about £28–£50 per m² including VAT, so a 80 m² drive is roughly £2,200–£3,950. Guide only; the survey confirms a fixed price.

Layer by layer

Where we work in and around Alton

What applies in Alton. We cover Alton by grouping surveys with nearby Hampshire jobs; Southampton is 25 miles away.

Postcodes: GU34
Area: Hampshire
Nearest towns: Bordon (5 miles), Farnham (9 miles), Basingstoke (9 miles), Fleet (11 miles)
Pricing: South East, about 10% above our UK midpoint
Kerb approvals: The highway authority

The same service is available in Bordon, Farnham, Basingstoke, Fleet, Aldershot.

Do I need permission in Alton?

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

What is included in tarmac resurfacing?

Tarmac resurfacing, or an overlay, means cleaning and repairing an existing drive, spraying a bond coat and laying a new surface course of about 25–40 mm on top, without digging out the base.

Cut out and patch failed areas before overlaying
Plane or cut back at thresholds, kerbs and covers so levels still work
Weed treatment and a clean surface
Bond (tack) coat sprayed to glue the new layer to the old
New surface course, typically 25–40 mm, laid hot and rolled

Alton: common questions

Will someone visit before I get a fixed price in Alton?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How quickly can work start in Alton?

Often 1–2 days for a typical drive. We book Alton surveys alongside other jobs in Hampshire, and give you dates once the specification is agreed.

What is the price of tarmac resurfacing in Alton?

As a 2026 guide in Alton, tarmac resurfacing work runs at about £28–£50 per m² including VAT, so a 80 m² drive is roughly £2,200–£3,950. Edging, drainage and a dropped kerb are priced separately where needed.

What approvals apply in Alton?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Also in Alton

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Alton.