Driveways and paths · Greater Manchester

Tarmac driveway resurfacing in Golborne

For tarmac resurfacing jobs in Golborne, we measure the area, check the ground and the falls, and give you an itemised price you can compare line by line with any other quote.

GOLBORNE GUIDE£24–£44 per m² inc VAT
Hot tarmac being spread with a lute rake on a driveway, typical of tarmac resurfacing work

What does tarmac resurfacing cost in Golborne?

For Golborne, we apply the North West rate, about 3% below our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
Tarmac resurfacing over a sound existing base£24–£44 per m²
Example: 30 m² drive£800–£1,450
Example: 50 m² drive£1,200–£2,200
Example: 80 m² drive£1,950–£3,500

As a 2026 guide in Golborne, tarmac resurfacing work runs at about £24–£44 per m² including VAT, so a 50 m² drive is roughly £1,200–£2,200. Guide only; the survey confirms a fixed price.

What the price covers

Tarmac resurfacing, or an overlay, means cleaning and repairing an existing drive, spraying a bond coat and laying a new surface course of about 25–40 mm on top, without digging out the base.

  • Survey of the existing base: sinking, rutting, loose edges and drainage
  • Cut out and patch failed areas before overlaying
  • Plane or cut back at thresholds, kerbs and covers so levels still work
  • Weed treatment and a clean surface
  • New surface course, typically 25–40 mm, laid hot and rolled

Rules that apply in Golborne

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

How it is built

New surface course25–40 mm AC 6 or AC 10Bond coatbitumen emulsion tack coatExisting driverepaired where failedExisting basemust be soundINDICATIVE CROSS-SECTION · NOT TO SCALE

Covering Golborne

Survey cover and pricing for Golborne. Golborne is covered on our Greater Manchester rounds, 15 miles from Manchester.

Postcodes
WA12
Area
Greater Manchester
Nearest towns
Newton-le-Willows (2 miles), Ashton-in-Makerfield (2 miles), Leigh (3 miles), Haydock (4 miles)
Pricing
North West, about 3% below our UK midpoint
Kerb approvals
The highway authority

Nearby, we work in Newton-le-Willows, Ashton-in-Makerfield, Leigh, Haydock, Hindley.

Your questions answered

Are there planning or highway rules in Golborne?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Tarmac resurfacing cost in Golborne: what should I budget?

As a 2026 guide in Golborne, tarmac resurfacing work runs at about £24–£44 per m² including VAT, so a 50 m² drive is roughly £1,200–£2,200. Edging, drainage and a dropped kerb are priced separately where needed.

Will someone visit before I get a fixed price in Golborne?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How quickly can work start in Golborne?

Often 1–2 days for a typical drive. We book Golborne surveys alongside other jobs in Greater Manchester, and give you dates once the specification is agreed.

Other work in Golborne

Ready for a price in Golborne? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

Tarmac driveway resurfacing in Golborne: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price