Driveways and paths · Greater Manchester

Tarmac driveway resurfacing in Bury

For tarmac resurfacing jobs in Bury, we measure the area, check the ground and the falls, and give you an itemised price you can compare line by line with any other quote.

BURY GUIDE£24–£44 per m² inc VAT
Hot tarmac being spread with a lute rake on a driveway, typical of tarmac resurfacing work

How much should I budget in Bury?

For Bury, we apply the North West rate, about 3% below our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
Tarmac resurfacing over a sound existing base£24–£44 per m²
Example: 30 m² drive£800–£1,450
Example: 50 m² drive£1,200–£2,200
Example: 80 m² drive£1,950–£3,500

As a 2026 guide in Bury, tarmac resurfacing work runs at about £24–£44 per m² including VAT, so a 80 m² drive is roughly £1,950–£3,500. Guide only; the survey confirms a fixed price.

What is included in tarmac resurfacing?

Tarmac resurfacing, or an overlay, means cleaning and repairing an existing drive, spraying a bond coat and laying a new surface course of about 25–40 mm on top, without digging out the base.

  • Survey of the existing base: sinking, rutting, loose edges and drainage
  • Plane or cut back at thresholds, kerbs and covers so levels still work
  • Weed treatment and a clean surface
  • Bond (tack) coat sprayed to glue the new layer to the old
  • New surface course, typically 25–40 mm, laid hot and rolled

Where we work in and around Bury

The key facts for Bury. Bury sits 9 miles from Manchester, within our regular Greater Manchester cover.

Postcodes
BL9, BL8
Area
Greater Manchester
Nearest towns
Radcliffe (3 miles), Heywood (3 miles), Ramsbottom (3 miles), Whitefield (3 miles)
Pricing
North West, about 3% below our UK midpoint
Kerb approvals
The highway authority

The same service is available in Radcliffe, Heywood, Ramsbottom, Whitefield, Prestwich.

Planning and kerb rules for Bury

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

Your questions answered

Can I get a free survey in Bury?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How quickly can work start in Bury?

Often 1–2 days for a typical drive. We book Bury surveys alongside other jobs in Greater Manchester, and give you dates once the specification is agreed.

Tarmac resurfacing cost in Bury: what should I budget?

As a 2026 guide in Bury, tarmac resurfacing work runs at about £24–£44 per m² including VAT, so a 80 m² drive is roughly £1,950–£3,500. Edging, drainage and a dropped kerb are priced separately where needed.

Are there planning or highway rules in Bury?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

More we do in Bury

Tell us what you have in mind for Bury and we'll book a survey and put the specification in writing.

Free survey for new surfacing

Tarmac driveway resurfacing in Bury: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price