Driveways and paths · Greater London

Tarmac driveway resurfacing in Bow

Planning tarmac resurfacing in Bow? We'll measure up, look at the edges and drainage, and set the specification out in writing before you commit to anything.

BOW GUIDE£30–£54 per m² inc VAT
Hot tarmac being spread with a lute rake on a driveway, typical of tarmac resurfacing work

Tarmac resurfacing prices in Bow

Guide prices below are for Bow, adjusted for London, where surfacing rates run about 20% above our UK midpoint.

ItemGuide price (inc VAT)
Tarmac resurfacing over a sound existing base£30–£54 per m²
Example: 30 m² drive£990–£1,800
Example: 50 m² drive£1,500–£2,700
Example: 80 m² drive£2,400–£4,300

As a 2026 guide in Bow, tarmac resurfacing work runs at about £30–£54 per m² including VAT, so a 50 m² drive is roughly £1,500–£2,700. Guide only; the survey confirms a fixed price.

Layer by layer

New surface course25–40 mm AC 6 or AC 10Bond coatbitumen emulsion tack coatExisting driverepaired where failedExisting basemust be soundINDICATIVE CROSS-SECTION · NOT TO SCALE

Rules that apply in Bow

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

What is included in tarmac resurfacing?

A new tack-coated surface course over a drive whose base is still sound: less digging, lower cost.

  • Cut out and patch failed areas before overlaying
  • Plane or cut back at thresholds, kerbs and covers so levels still work
  • Weed treatment and a clean surface
  • New surface course, typically 25–40 mm, laid hot and rolled
  • Edges sealed and joints to existing surfaces cut neatly

Where we work in and around Bow

The key facts for Bow. Bow is one of the bigger places we cover in Greater London, so survey slots come round regularly.

Postcodes
E3, E14, E9, E1, E1W
Area
Greater London
Nearest towns
Stratford (1 mile), Canning Town (2 miles), Leytonstone (3 miles), Greenwich (3 miles)
Pricing
London, about 20% above our UK midpoint
Kerb approvals
The highway authority

Close to Bow: Stratford, Canning Town, Leytonstone, Greenwich, Islington.

Your questions answered

Do you cover all of Bow?

We cover Bow including E3, E14, E9, E1, E1W, and nearby Stratford, Canning Town, Leytonstone.

Can I get a free survey in Bow?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How long does tarmac resurfacing take in Bow?

Often 1–2 days for a typical drive. We book Bow surveys alongside other jobs in Greater London, and give you dates once the specification is agreed.

Do I need permission for tarmac resurfacing in Bow?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

More we do in Bow

Questions about tarmac resurfacing jobs in Bow? Call, WhatsApp or use the form, and we'll talk it through.

Free survey for new surfacing

Tarmac driveway resurfacing in Bow: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price