Tarmac driveway resurfacing in Stroud
A good tarmac resurfacing job in Stroud looks the same as a poor one on the day it is laid. The difference shows a few winters later, which is why our quotes list what goes underneath.

Tarmac resurfacing prices in Stroud
Guide prices below are for Stroud, adjusted for the South West, where surfacing rates run about 3% above our UK midpoint.
| Item | Guide price (inc VAT) |
|---|---|
| Tarmac resurfacing over a sound existing base | £26–£46 per m² |
| Example: 30 m² drive | £850–£1,550 |
| Example: 50 m² drive | £1,300–£2,300 |
| Example: 80 m² drive | £2,050–£3,700 |
As a 2026 guide in Stroud, tarmac resurfacing work runs at about £26–£46 per m² including VAT, so a 50 m² drive is roughly £1,300–£2,300. Guide only; the survey confirms a fixed price.
What the price covers
A new tack-coated surface course over a drive whose base is still sound: less digging, lower cost.
- Survey of the existing base: sinking, rutting, loose edges and drainage
- Cut out and patch failed areas before overlaying
- Plane or cut back at thresholds, kerbs and covers so levels still work
- New surface course, typically 25–40 mm, laid hot and rolled
- Edges sealed and joints to existing surfaces cut neatly
Covering Stroud
Survey cover and pricing for Stroud. Stroud is 8 miles from Gloucester, and we survey there as part of Gloucestershire cover.
- Postcodes
- GL6, GL5, GL10
- Area
- Gloucestershire
- Nearest towns
- Gloucester (8 miles), Cirencester (10 miles), Cheltenham (12 miles), Tewkesbury (17 miles)
- Pricing
- South West, about 3% above our UK midpoint
- Kerb approvals
- The highway authority
Nearby, we work in Gloucester, Cirencester, Cheltenham, Tewkesbury, Yate.
Do I need permission in Stroud?
In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.
Your questions answered
Are there planning or highway rules in Stroud?
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).
How long does tarmac resurfacing take in Stroud?
Often 1–2 days for a typical drive. We book Stroud surveys alongside other jobs in Gloucestershire, and give you dates once the specification is agreed.
Which Stroud postcodes do you cover?
We cover Stroud including GL6, GL5, GL10, and nearby Gloucester, Cirencester, Cheltenham.
Is the survey in Stroud free?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
More we do in Stroud
- Car park and yard repairs
- Red tarmac driveways
- New tarmac driveways
- Tar and chip driveways
- Private and access road surfacing
- Car park resurfacing
- Everything in Stroud
Questions about tarmac resurfacing jobs in Stroud? Call, WhatsApp or use the form, and we'll talk it through.
Tarmac driveway resurfacing in Stroud: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED