Driveways and paths · Essex

Tarmac driveway resurfacing in Brentwood

Every tarmac resurfacing job we price in Brentwood comes with a written specification, so the dig depth, sub-base, binder course and surface course are on paper before anything is agreed.

BRENTWOOD GUIDE£26–£47 per m² inc VAT
Hot tarmac being spread with a lute rake on a driveway, typical of tarmac resurfacing work

What does tarmac resurfacing cost in Brentwood?

For Brentwood, we apply the East of England rate, about 5% above our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
Tarmac resurfacing over a sound existing base£26–£47 per m²
Example: 30 m² drive£870–£1,550
Example: 50 m² drive£1,300–£2,350
Example: 80 m² drive£2,100–£3,800

As a 2026 guide in Brentwood, tarmac resurfacing work runs at about £26–£47 per m² including VAT, so a 80 m² drive is roughly £2,100–£3,800. Guide only; the survey confirms a fixed price.

The build-up we price

New surface course25–40 mm AC 6 or AC 10Bond coatbitumen emulsion tack coatExisting driverepaired where failedExisting basemust be soundINDICATIVE CROSS-SECTION · NOT TO SCALE

Covering Brentwood

What applies in Brentwood. We reach Brentwood on our Essex survey days; Southend-on-Sea is 18 miles away.

Postcodes
CM14, CM13, CM15
Area
Essex
Nearest towns
Billericay (5 miles), Hornchurch (6 miles), Romford (6 miles), Basildon (7 miles)
Pricing
East of England, about 5% above our UK midpoint
Kerb approvals
The highway authority

We also cover nearby Billericay, Hornchurch, Romford, Basildon, Dagenham.

Rules that apply in Brentwood

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

What we do on tarmac resurfacing

Tarmac resurfacing, or an overlay, means cleaning and repairing an existing drive, spraying a bond coat and laying a new surface course of about 25–40 mm on top, without digging out the base.

  • Survey of the existing base: sinking, rutting, loose edges and drainage
  • Weed treatment and a clean surface
  • Bond (tack) coat sprayed to glue the new layer to the old
  • New surface course, typically 25–40 mm, laid hot and rolled
  • Edges sealed and joints to existing surfaces cut neatly

Questions about tarmac resurfacing jobs in Brentwood

What approvals apply in Brentwood?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

How long will the work take at my Brentwood property?

Often 1–2 days for a typical drive. We book Brentwood surveys alongside other jobs in Essex, and give you dates once the specification is agreed.

Do you work in my part of Brentwood?

We cover Brentwood including CM14, CM13, CM15, and nearby Billericay, Hornchurch, Romford.

Will someone visit before I get a fixed price in Brentwood?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

More we do in Brentwood

Tell us what you have in mind for Brentwood and we'll book a survey and put the specification in writing.

Free survey for new surfacing

Tarmac driveway resurfacing in Brentwood: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price