Driveways and paths · County Down

Tarmac driveway resurfacing in Comber

Tarmac driveway resurfacing in Comber start with the parts you won't see: how deep the ground is dug, how much stone goes back in, and where the rain will run once the drive is sealed.

COMBER GUIDE£22–£40 per m² inc VAT
Hot tarmac being spread with a lute rake on a driveway, typical of tarmac resurfacing work

What does tarmac resurfacing cost in Comber?

Local guide rates for Comber (Northern Ireland, about 12% below our UK midpoint):

ItemGuide price (inc VAT)
Tarmac resurfacing over a sound existing base£22–£40 per m²
Example: 30 m² drive£730–£1,300
Example: 50 m² drive£1,100–£2,000
Example: 80 m² drive£1,750–£3,150

As a 2026 guide in Comber, tarmac resurfacing work runs at about £22–£40 per m² including VAT, so a 80 m² drive is roughly £1,750–£3,150. Guide only; the survey confirms a fixed price.

Do I need permission in Comber?

In Northern Ireland, more than 5 m² of hard surface in front of a house should be porous or drain to a porous area within the property; DfI Roads approves dropped kerbs. If the job needs a dropped kerb, DfI Roads approves it before any work on the footway.

Where we work in and around Comber

What applies in Comber. Smaller towns such as Comber are surveyed alongside nearby jobs in County Down.

Postcodes
BT23
Area
County Down
Nearest towns
Newtownards (4 miles), Dundonald (4 miles), Castlereagh (6 miles), Holywood (7 miles)
Pricing
Northern Ireland, about 12% below our UK midpoint
Kerb approvals
DfI Roads

Nearby, we work in Newtownards, Dundonald, Castlereagh, Holywood, Belfast.

What is included in tarmac resurfacing?

Tarmac resurfacing, or an overlay, means cleaning and repairing an existing drive, spraying a bond coat and laying a new surface course of about 25–40 mm on top, without digging out the base.

  • Cut out and patch failed areas before overlaying
  • Plane or cut back at thresholds, kerbs and covers so levels still work
  • Weed treatment and a clean surface
  • New surface course, typically 25–40 mm, laid hot and rolled
  • Edges sealed and joints to existing surfaces cut neatly

The build-up we price

New surface course25–40 mm AC 6 or AC 10Bond coatbitumen emulsion tack coatExisting driverepaired where failedExisting basemust be soundINDICATIVE CROSS-SECTION · NOT TO SCALE

Your questions answered

Can I get a free survey in Comber?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Which Comber postcodes do you cover?

We cover Comber including BT23, and nearby Newtownards, Dundonald, Castlereagh.

Tarmac resurfacing cost in Comber: what should I budget?

As a 2026 guide in Comber, tarmac resurfacing work runs at about £22–£40 per m² including VAT, so a 80 m² drive is roughly £1,750–£3,150. Edging, drainage and a dropped kerb are priced separately where needed.

Are there planning or highway rules in Comber?

In Northern Ireland, more than 5 m² of hard surface in front of a house should be porous or drain to a porous area within the property; DfI Roads approves dropped kerbs. Dropped kerbs are approved by DfI Roads.

Other work in Comber

Tell us what you have in mind for Comber and we'll book a survey and put the specification in writing.

Free survey for new surfacing

Tarmac driveway resurfacing in Comber: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price