Tar and chip driveways in Malvern
We survey and price tar and chip driveways across Malvern and the WR14, WR13, WR8 postcodes, with every layer and its depth written into the quote.

Tar and chip driveway prices in Malvern
Local guide rates for Malvern (the West Midlands, in line with our UK midpoint):
| Item | Guide price (inc VAT) |
|---|---|
| Tar and chip drive with a new sub-base | £45–£75 per m² |
| Example: 50 m² drive | £2,250–£3,750 |
| Example: 100 m² drive | £4,500–£7,500 |
| Example: 200 m² drive | £8,550–£14,250 |
As a 2026 guide in Malvern, tar and chip driveway work runs at about £45–£75 per m² including VAT, so a 100 m² drive is roughly £4,500–£7,500. Guide only; the survey confirms a fixed price.
Malvern: the local details
Survey cover and pricing for Malvern. Malvern is 7 miles from Worcester, and we survey there as part of Worcestershire cover.
- Postcodes
- WR14, WR13, WR8
- Area
- Worcestershire
- Nearest towns
- Ledbury (7 miles), Worcester (7 miles), Tewkesbury (11 miles), Droitwich (13 miles)
- Pricing
- West Midlands, in line with our UK midpoint
- Kerb approvals
- The highway authority
Close to Malvern: Ledbury, Worcester, Tewkesbury, Droitwich, Stourport-on-Severn.
Planning and kerb rules for Malvern
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).
What is included in a tar and chip driveway?
Hot bitumen sprayed and dressed with rolled stone chippings for a gravel look that stays put.
- Edges set with kerbs, setts or cobbles
- Hot bitumen or emulsion sprayed evenly
- Chippings spread straight onto the binder
- Rolled to bed the stones in
- Loose surplus chippings swept up after a few days
Your questions answered
How much does a tar and chip driveway cost in Malvern?
As a 2026 guide in Malvern, tar and chip driveway work runs at about £45–£75 per m² including VAT, so a 100 m² drive is roughly £4,500–£7,500. Edging, drainage and a dropped kerb are priced separately where needed.
Do I need permission for a tar and chip driveway in Malvern?
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).
Will someone visit before I get a fixed price in Malvern?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
How long will the work take at my Malvern property?
Often 1–3 days depending on base work. We book Malvern surveys alongside other jobs in Worcestershire, and give you dates once the specification is agreed.
More we do in Malvern
- Tarmac paths and footpaths
- Car park surfacing
- Car park resurfacing
- Permeable tarmac driveways
- New tarmac driveways
- Tarmac driveway resurfacing
- Everything in Malvern
Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Malvern.
Tar and chip driveways in Malvern: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED