Tar and chip driveways in Bromsgrove

Tar and chip driveway prices in Bromsgrove

Guide prices below are for Bromsgrove, adjusted for the West Midlands, where surfacing rates run in line with our UK midpoint.

Item	Guide price (inc VAT)
Tar and chip drive with a new sub-base	£45–£75 per m²
Example: 50 m² drive	£2,250–£3,750
Example: 100 m² drive	£4,500–£7,500
Example: 200 m² drive	£8,550–£14,250

As a 2026 guide in Bromsgrove, tar and chip driveway work runs at about £45–£75 per m² including VAT, so a 50 m² drive is roughly £2,250–£3,750. Guide only; the survey confirms a fixed price.

Bromsgrove: the local details

Survey cover and pricing for Bromsgrove. Bromsgrove sits 12 miles from Worcester, within our regular Worcestershire cover.

Postcodes: B60, B61, B45
Area: Worcestershire
Nearest towns: Redditch (5 miles), Droitwich (6 miles), Halesowen (8 miles), Kidderminster (9 miles)
Pricing: West Midlands, in line with our UK midpoint
Kerb approvals: The highway authority

The same service is available in Redditch, Droitwich, Halesowen, Kidderminster, Stourbridge.

Planning and kerb rules for Bromsgrove

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

What we do on a tar and chip driveway

Tar and chip, also called surface dressing, is a layer of bitumen sprayed onto a prepared base and immediately covered with stone chippings, which are rolled in so the surface looks like gravel but behaves like a bound drive.

Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
Edges set with kerbs, setts or cobbles
Hot bitumen or emulsion sprayed evenly
Chippings spread straight onto the binder
Loose surplus chippings swept up after a few days

Questions about tar and chip driveways in Bromsgrove

How long will the work take at my Bromsgrove property?

Often 1–3 days depending on base work. We book Bromsgrove surveys alongside other jobs in Worcestershire, and give you dates once the specification is agreed.

Do I need permission for a tar and chip driveway in Bromsgrove?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Can I get a free survey in Bromsgrove?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

What is the price of a tar and chip driveway in Bromsgrove?

As a 2026 guide in Bromsgrove, tar and chip driveway work runs at about £45–£75 per m² including VAT, so a 50 m² drive is roughly £2,250–£3,750. Edging, drainage and a dropped kerb are priced separately where needed.

More we do in Bromsgrove

Ready for a price in Bromsgrove? Use the guide price tool or send the form, and we'll arrange a visit.