Tar and chip driveways in Heckmondwike

Tar and chip driveway prices in Heckmondwike

These Heckmondwike guide prices reflect rates in Yorkshire and the Humber, about 4% below our UK midpoint.

Item	Guide price (inc VAT)
Tar and chip drive with a new sub-base	£43–£72 per m²
Example: 50 m² drive	£2,150–£3,600
Example: 100 m² drive	£4,300–£7,200
Example: 200 m² drive	£8,200–£13,700

As a 2026 guide in Heckmondwike, tar and chip driveway work runs at about £43–£72 per m² including VAT, so a 100 m² drive is roughly £4,300–£7,200. Guide only; the survey confirms a fixed price.

What the price covers

Hot bitumen sprayed and dressed with rolled stone chippings for a gravel look that stays put.

Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
Edges set with kerbs, setts or cobbles
Chippings spread straight onto the binder
Loose surplus chippings swept up after a few days
Second coat where a double dressing is specified

Do I need permission in Heckmondwike?

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

How it is built

Heckmondwike: the local details

The key facts for Heckmondwike. Heckmondwike is covered on our West Yorkshire rounds, 8 miles from Leeds.

Postcodes: WF16
Area: West Yorkshire
Nearest towns: Liversedge (1 mile), Batley (2 miles), Cleckheaton (2 miles), Dewsbury (2 miles)
Pricing: Yorkshire and the Humber, about 4% below our UK midpoint
Kerb approvals: The highway authority

The same service is available in Liversedge, Batley, Cleckheaton, Dewsbury, Mirfield.

Your questions answered

How quickly can work start in Heckmondwike?

Often 1–3 days depending on base work. We book Heckmondwike surveys alongside other jobs in West Yorkshire, and give you dates once the specification is agreed.

Will someone visit before I get a fixed price in Heckmondwike?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How much does a tar and chip driveway cost in Heckmondwike?

As a 2026 guide in Heckmondwike, tar and chip driveway work runs at about £43–£72 per m² including VAT, so a 100 m² drive is roughly £4,300–£7,200. Edging, drainage and a dropped kerb are priced separately where needed.

What approvals apply in Heckmondwike?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

More we do in Heckmondwike

Ready for a price in Heckmondwike? Use the guide price tool or send the form, and we'll arrange a visit.