Driveways and paths · West Sussex

Tar and chip driveways in Lancing

A good tar and chip driveway in Lancing looks the same as a poor one on the day it is laid. The difference shows a few winters later, which is why our quotes list what goes underneath.

LANCING GUIDE£50–£82 per m² inc VAT
Tar and chip driveway with golden chippings leading to a country cottage, typical of tar and chip driveway work

Tar and chip driveway prices in Lancing

Guide prices below are for Lancing, adjusted for the South East, where surfacing rates run about 10% above our UK midpoint.

ItemGuide price (inc VAT)
Tar and chip drive with a new sub-base£50–£82 per m²
Example: 50 m² drive£2,500–£4,100
Example: 100 m² drive£4,950–£8,250
Example: 200 m² drive£9,400–£15,700

As a 2026 guide in Lancing, tar and chip driveway work runs at about £50–£82 per m² including VAT, so a 50 m² drive is roughly £2,500–£4,100. Guide only; the survey confirms a fixed price.

What is included in a tar and chip driveway?

Tar and chip, also called surface dressing, is a layer of bitumen sprayed onto a prepared base and immediately covered with stone chippings, which are rolled in so the surface looks like gravel but behaves like a bound drive.

  • Edges set with kerbs, setts or cobbles
  • Chippings spread straight onto the binder
  • Rolled to bed the stones in
  • Loose surplus chippings swept up after a few days
  • Second coat where a double dressing is specified

Where we work in and around Lancing

Lancing at a glance. Smaller towns such as Lancing are surveyed alongside nearby jobs in West Sussex.

Postcodes
BN15, BN44
Area
West Sussex
Nearest towns
Shoreham-by-Sea (2 miles), Worthing (2 miles), Portslade (5 miles), Hove (7 miles)
Pricing
South East, about 10% above our UK midpoint
Kerb approvals
The highway authority

We also cover nearby Shoreham-by-Sea, Worthing, Portslade, Hove, Brighton.

Planning and kerb rules for Lancing

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

Your questions answered

Is the survey in Lancing free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Tar and chip driveway cost in Lancing: what should I budget?

As a 2026 guide in Lancing, tar and chip driveway work runs at about £50–£82 per m² including VAT, so a 50 m² drive is roughly £2,500–£4,100. Edging, drainage and a dropped kerb are priced separately where needed.

Which Lancing postcodes do you cover?

We cover Lancing including BN15, BN44, and nearby Shoreham-by-Sea, Worthing, Portslade.

Do I need permission for a tar and chip driveway in Lancing?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

More we do in Lancing

Ready for a price in Lancing? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

Tar and chip driveways in Lancing: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price