Tar and chip driveways in Ewell

How much should I budget in Ewell?

For Ewell, we apply the South East rate, about 10% above our UK midpoint. Your survey turns these ranges into a fixed price.

Item	Guide price (inc VAT)
Tar and chip drive with a new sub-base	£50–£82 per m²
Example: 50 m² drive	£2,500–£4,100
Example: 100 m² drive	£4,950–£8,250
Example: 200 m² drive	£9,400–£15,700

As a 2026 guide in Ewell, tar and chip driveway work runs at about £50–£82 per m² including VAT, so a 100 m² drive is roughly £4,950–£8,250. Guide only; the survey confirms a fixed price.

The build-up we price

Planning and kerb rules for Ewell

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

What is included in a tar and chip driveway?

Tar and chip, also called surface dressing, is a layer of bitumen sprayed onto a prepared base and immediately covered with stone chippings, which are rolled in so the surface looks like gravel but behaves like a bound drive.

Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
Edges set with kerbs, setts or cobbles
Rolled to bed the stones in
Loose surplus chippings swept up after a few days
Second coat where a double dressing is specified

Where we work in and around Ewell

The key facts for Ewell. Ewell sits 14 miles from Woking, within our regular Surrey cover.

Postcodes: KT17, KT19, KT4
Area: Surrey
Nearest towns: Epsom (2 miles), Sutton (2 miles), Banstead (3 miles), Surbiton (4 miles)
Pricing: South East, about 10% above our UK midpoint
Kerb approvals: The highway authority

We also cover nearby Epsom, Sutton, Banstead, Surbiton, Carshalton.

Ewell: common questions

Tar and chip driveway cost in Ewell: what should I budget?

As a 2026 guide in Ewell, tar and chip driveway work runs at about £50–£82 per m² including VAT, so a 100 m² drive is roughly £4,950–£8,250. Edging, drainage and a dropped kerb are priced separately where needed.

Do I need permission for a tar and chip driveway in Ewell?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Will someone visit before I get a fixed price in Ewell?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Which Ewell postcodes do you cover?

We cover Ewell including KT17, KT19, KT4, and nearby Epsom, Sutton, Banstead.

Also in Ewell

Ready for a price in Ewell? Use the guide price tool or send the form, and we'll arrange a visit.