Tar and chip driveways in Ashford, Surrey
For tar and chip driveways in Ashford, Surrey, we measure the area, check the ground and the falls, and give you an itemised price you can compare line by line with any other quote.

How much should I budget in Ashford, Surrey?
Guide prices below are for Ashford, Surrey, adjusted for the South East, where surfacing rates run about 10% above our UK midpoint.
| Item | Guide price (inc VAT) |
|---|---|
| Tar and chip drive with a new sub-base | £50–£82 per m² |
| Example: 50 m² drive | £2,500–£4,100 |
| Example: 100 m² drive | £4,950–£8,250 |
| Example: 200 m² drive | £9,400–£15,700 |
As a 2026 guide in Ashford, Surrey, tar and chip driveway work runs at about £50–£82 per m² including VAT, so a 100 m² drive is roughly £4,950–£8,250. Guide only; the survey confirms a fixed price.
What we do on a tar and chip driveway
Tar and chip, also called surface dressing, is a layer of bitumen sprayed onto a prepared base and immediately covered with stone chippings, which are rolled in so the surface looks like gravel but behaves like a bound drive.
- Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
- Edges set with kerbs, setts or cobbles
- Hot bitumen or emulsion sprayed evenly
- Chippings spread straight onto the binder
- Loose surplus chippings swept up after a few days
Planning and kerb rules for Ashford, Surrey
In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).
Covering Ashford, Surrey
Ashford, Surrey at a glance. We cover Ashford, Surrey by grouping surveys with nearby Surrey jobs; Woking is 9 miles away.
- Postcodes
- TW15
- Area
- Surrey
- Nearest towns
- Staines (2 miles), Feltham (2 miles), Sunbury-on-Thames (3 miles), Walton-on-Thames (4 miles)
- Pricing
- South East, about 10% above our UK midpoint
- Kerb approvals
- The highway authority
We also cover nearby Staines, Feltham, Sunbury-on-Thames, Walton-on-Thames, Chertsey.
How it is built
Ashford, Surrey: common questions
What approvals apply in Ashford, Surrey?
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).
Which Ashford, Surrey postcodes do you cover?
We cover Ashford, Surrey including TW15, and nearby Staines, Feltham, Sunbury-on-Thames.
Can I get a free survey in Ashford, Surrey?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
How quickly can work start in Ashford, Surrey?
Often 1–3 days depending on base work. We book Ashford, Surrey surveys alongside other jobs in Surrey, and give you dates once the specification is agreed.
Also in Ashford, Surrey
- Car park surfacing
- Car park resurfacing
- New tarmac driveways
- Private and access road surfacing
- Car park and yard repairs
- Permeable tarmac driveways
- Everything in Ashford, Surrey
Tell us what you have in mind for Ashford, Surrey and we'll book a survey and put the specification in writing.
Tar and chip driveways in Ashford, Surrey: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED