Tar and chip driveways in Clevedon
Every tar and chip driveway we price in Clevedon comes with a written specification, so the dig depth, sub-base, binder course and surface course are on paper before anything is agreed.

What does a tar and chip driveway cost in Clevedon?
Guide prices below are for Clevedon, adjusted for the South West, where surfacing rates run about 3% above our UK midpoint.
| Item | Guide price (inc VAT) |
|---|---|
| Tar and chip drive with a new sub-base | £46–£77 per m² |
| Example: 50 m² drive | £2,300–£3,850 |
| Example: 100 m² drive | £4,650–£7,700 |
| Example: 200 m² drive | £8,800–£14,700 |
As a 2026 guide in Clevedon, tar and chip driveway work runs at about £46–£77 per m² including VAT, so a 50 m² drive is roughly £2,300–£3,850. Guide only; the survey confirms a fixed price.
Layer by layer
Covering Clevedon
What applies in Clevedon. We cover Clevedon by grouping surveys with nearby Somerset jobs; Bath is 22 miles away.
- Postcodes
- BS21
- Area
- Somerset
- Nearest towns
- Nailsea (4 miles), Portishead (5 miles), Weston-super-Mare (8 miles), Bristol (11 miles)
- Pricing
- South West, about 3% above our UK midpoint
- Kerb approvals
- The highway authority
Nearby, we work in Nailsea, Portishead, Weston-super-Mare, Bristol, Burnham-on-Sea.
What the price covers
Hot bitumen sprayed and dressed with rolled stone chippings for a gravel look that stays put.
- Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
- Hot bitumen or emulsion sprayed evenly
- Rolled to bed the stones in
- Loose surplus chippings swept up after a few days
- Second coat where a double dressing is specified
Do I need permission in Clevedon?
In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).
Clevedon: common questions
Do you work in my part of Clevedon?
We cover Clevedon including BS21, and nearby Nailsea, Portishead, Weston-super-Mare.
Do I need permission for a tar and chip driveway in Clevedon?
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).
Is the survey in Clevedon free?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
What is the price of a tar and chip driveway in Clevedon?
As a 2026 guide in Clevedon, tar and chip driveway work runs at about £46–£77 per m² including VAT, so a 50 m² drive is roughly £2,300–£3,850. Edging, drainage and a dropped kerb are priced separately where needed.
More we do in Clevedon
- Permeable tarmac driveways
- Car park surfacing
- Red tarmac driveways
- Front garden to tarmac driveway
- Car park resurfacing
- Tarmac paths and footpaths
- Everything in Clevedon
Questions about tar and chip driveways in Clevedon? Call, WhatsApp or use the form, and we'll talk it through.
Tar and chip driveways in Clevedon: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED