Driveways and paths · Shropshire

Tar and chip driveways in Oswestry

A good tar and chip driveway in Oswestry looks the same as a poor one on the day it is laid. The difference shows a few winters later, which is why our quotes list what goes underneath.

OSWESTRY GUIDE£45–£75 per m² inc VAT
Tar and chip driveway with golden chippings leading to a country cottage, typical of tar and chip driveway work

Tar and chip driveway prices in Oswestry

Guide prices below are for Oswestry, adjusted for the West Midlands, where surfacing rates run in line with our UK midpoint.

ItemGuide price (inc VAT)
Tar and chip drive with a new sub-base£45–£75 per m²
Example: 50 m² drive£2,250–£3,750
Example: 100 m² drive£4,500–£7,500
Example: 200 m² drive£8,550–£14,250

As a 2026 guide in Oswestry, tar and chip driveway work runs at about £45–£75 per m² including VAT, so a 50 m² drive is roughly £2,250–£3,750. Guide only; the survey confirms a fixed price.

Oswestry: the local details

Oswestry at a glance. We cover Oswestry by grouping surveys with nearby Shropshire jobs; Telford is 28 miles away.

Postcodes
SY11, SY10
Area
Shropshire
Nearest towns
Shrewsbury (16 miles)
Pricing
West Midlands, in line with our UK midpoint
Kerb approvals
The highway authority

Nearby, we work in Shrewsbury.

What is included in a tar and chip driveway?

Hot bitumen sprayed and dressed with rolled stone chippings for a gravel look that stays put.

  • Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
  • Edges set with kerbs, setts or cobbles
  • Hot bitumen or emulsion sprayed evenly
  • Loose surplus chippings swept up after a few days
  • Second coat where a double dressing is specified

Planning and kerb rules for Oswestry

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

Questions about tar and chip driveways in Oswestry

Will someone visit before I get a fixed price in Oswestry?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do I need permission for a tar and chip driveway in Oswestry?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

How quickly can work start in Oswestry?

Often 1–3 days depending on base work. We book Oswestry surveys alongside other jobs in Shropshire, and give you dates once the specification is agreed.

Which Oswestry postcodes do you cover?

We cover Oswestry including SY11, SY10, and nearby Shrewsbury.

More we do in Oswestry

Questions about tar and chip driveways in Oswestry? Call, WhatsApp or use the form, and we'll talk it through.

Free survey for new surfacing

Tar and chip driveways in Oswestry: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price