Tar and chip driveways in Welshpool

What does a tar and chip driveway cost in Welshpool?

Guide prices below are for Welshpool, adjusted for Wales, where surfacing rates run about 5% below our UK midpoint.

Item	Guide price (inc VAT)
Tar and chip drive with a new sub-base	£43–£71 per m²
Example: 50 m² drive	£2,150–£3,550
Example: 100 m² drive	£4,300–£7,100
Example: 200 m² drive	£8,100–£13,550

As a 2026 guide in Welshpool, tar and chip driveway work runs at about £43–£71 per m² including VAT, so a 100 m² drive is roughly £4,300–£7,100. Guide only; the survey confirms a fixed price.

Layer by layer

What is included in a tar and chip driveway?

Hot bitumen sprayed and dressed with rolled stone chippings for a gravel look that stays put.

Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
Hot bitumen or emulsion sprayed evenly
Rolled to bed the stones in
Loose surplus chippings swept up after a few days
Second coat where a double dressing is specified

Rules that apply in Welshpool

In Wales, a new hard surface in front of a house is permitted development only if it is porous or drains to a permeable area within the property; repairing or replacing up to 5 m² of existing hardstanding is allowed without meeting that condition. Separately, since January 2019, construction covering 100 m² or more that affects drainage generally needs approval from the council's SuDS Approving Body (SAB) before work starts, even where planning permission is not needed. Larger drives, shared surfaces and car parks often reach that threshold. A vehicle crossing over the footway is a separate approval, from the council as highway authority.

Covering Welshpool

The key facts for Welshpool. Welshpool is covered on our Powys rounds, 12 miles from Newtown.

Postcodes: SY21
Area: Powys
Nearest towns: Newtown (12 miles)
Pricing: Wales, about 5% below our UK midpoint
Kerb approvals: The council

Nearby, we work in Newtown.

Your questions answered

What is the price of a tar and chip driveway in Welshpool?

As a 2026 guide in Welshpool, tar and chip driveway work runs at about £43–£71 per m² including VAT, so a 100 m² drive is roughly £4,300–£7,100. Edging, drainage and a dropped kerb are priced separately where needed.

Do I need permission for a tar and chip driveway in Welshpool?

In Wales, new front hardstanding should be porous or drain to a permeable area within the property, and work covering 100 m² or more with drainage effects usually needs SAB approval first. Dropped kerbs are approved by the council as highway authority.

How long does a tar and chip driveway take in Welshpool?

Often 1–3 days depending on base work. We book Welshpool surveys alongside other jobs in Powys, and give you dates once the specification is agreed.

Which Welshpool postcodes do you cover?

We cover Welshpool including SY21, and nearby Newtown.

Also in Welshpool

Ready for a price in Welshpool? Use the guide price tool or send the form, and we'll arrange a visit.