Driveways and paths · Perth and Kinross

Tar and chip driveways in Crieff

Every tar and chip driveway we price in Crieff comes with a written specification, so the dig depth, sub-base, binder course and surface course are on paper before anything is agreed.

CRIEFF GUIDE£44–£74 per m² inc VAT
Tar and chip driveway with golden chippings leading to a country cottage, typical of tar and chip driveway work

What does a tar and chip driveway cost in Crieff?

For Crieff, we apply the Scottish rate, about 2% below our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
Tar and chip drive with a new sub-base£44–£74 per m²
Example: 50 m² drive£2,200–£3,700
Example: 100 m² drive£4,400–£7,350
Example: 200 m² drive£8,400–£13,950

As a 2026 guide in Crieff, tar and chip driveway work runs at about £44–£74 per m² including VAT, so a 50 m² drive is roughly £2,200–£3,700. Guide only; the survey confirms a fixed price.

Crieff: the local details

The key facts for Crieff. Smaller towns such as Crieff are surveyed alongside nearby jobs in Perth and Kinross.

Postcodes
PH7, PH5
Area
Perth and Kinross
Nearest towns
Auchterarder (7 miles), Perth (16 miles), Scone (17 miles), Blairgowrie (24 miles)
Pricing
Scotland, about 2% below our UK midpoint
Kerb approvals
The council

Close to Crieff: Auchterarder, Perth, Scone, Blairgowrie.

Do I need permission in Crieff?

In Scotland, a hard surface between the house and a road is permitted development only if it is porous or drains to a porous area within the property, whatever its size. A vehicle crossing over the footway is a separate approval, from the council as roads authority.

What the price covers

Tar and chip, also called surface dressing, is a layer of bitumen sprayed onto a prepared base and immediately covered with stone chippings, which are rolled in so the surface looks like gravel but behaves like a bound drive.

  • Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
  • Edges set with kerbs, setts or cobbles
  • Hot bitumen or emulsion sprayed evenly
  • Chippings spread straight onto the binder
  • Loose surplus chippings swept up after a few days

How it is built

Dressingchippings rolled into bitumenBindersprayed bitumen or emulsionBaseMOT Type 1 or existing sound surfaceEdgeskerbs, setts or cobblesINDICATIVE CROSS-SECTION · NOT TO SCALE

Questions about tar and chip driveways in Crieff

How long will the work take at my Crieff property?

Often 1–3 days depending on base work. We book Crieff surveys alongside other jobs in Perth and Kinross, and give you dates once the specification is agreed.

Will someone visit before I get a fixed price in Crieff?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do you work in my part of Crieff?

We cover Crieff including PH7, PH5, and nearby Auchterarder, Perth, Scone.

How much does a tar and chip driveway cost in Crieff?

As a 2026 guide in Crieff, tar and chip driveway work runs at about £44–£74 per m² including VAT, so a 50 m² drive is roughly £2,200–£3,700. Edging, drainage and a dropped kerb are priced separately where needed.

Other work in Crieff

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Crieff.

Free survey for new surfacing

Tar and chip driveways in Crieff: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price