Tar and chip driveways in Retford

How much should I budget in Retford?

Local guide rates for Retford (the East Midlands, about 2% below our UK midpoint):

Item	Guide price (inc VAT)
Tar and chip drive with a new sub-base	£44–£74 per m²
Example: 50 m² drive	£2,200–£3,700
Example: 100 m² drive	£4,400–£7,350
Example: 200 m² drive	£8,400–£13,950

As a 2026 guide in Retford, tar and chip driveway work runs at about £44–£74 per m² including VAT, so a 100 m² drive is roughly £4,400–£7,350. Guide only; the survey confirms a fixed price.

What we do on a tar and chip driveway

Hot bitumen sprayed and dressed with rolled stone chippings for a gravel look that stays put.

Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
Chippings spread straight onto the binder
Rolled to bed the stones in
Loose surplus chippings swept up after a few days
Second coat where a double dressing is specified

Planning and kerb rules for Retford

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

Retford: the local details

Survey cover and pricing for Retford. We cover Retford by grouping surveys with nearby Nottinghamshire jobs; Nottingham is 27 miles away.

Postcodes: DN22
Area: Nottinghamshire
Nearest towns: Worksop (8 miles), Gainsborough (8 miles), Dinnington (11 miles), Mansfield Woodhouse (15 miles)
Pricing: East Midlands, about 2% below our UK midpoint
Kerb approvals: The highway authority

We also cover nearby Worksop, Gainsborough, Dinnington, Mansfield Woodhouse, Mansfield.

The build-up we price

Questions about tar and chip driveways in Retford

What is the price of a tar and chip driveway in Retford?

As a 2026 guide in Retford, tar and chip driveway work runs at about £44–£74 per m² including VAT, so a 100 m² drive is roughly £4,400–£7,350. Edging, drainage and a dropped kerb are priced separately where needed.

What approvals apply in Retford?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Do you work in my part of Retford?

We cover Retford including DN22, and nearby Worksop, Gainsborough, Dinnington.

Can I get a free survey in Retford?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Also in Retford

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Retford.