Driveways and paths · North Yorkshire

Tar and chip driveways in Scarborough

Homeowners in Scarborough ask us about tar and chip driveways for the same reason: a surface that stays flat, drains properly and still looks tidy in ten years. That comes down to the build underneath.

SCARBOROUGH GUIDE£43–£72 per m² inc VAT
Tar and chip driveway with golden chippings leading to a country cottage, typical of tar and chip driveway work

What does a tar and chip driveway cost in Scarborough?

These Scarborough guide prices reflect rates in Yorkshire and the Humber, about 4% below our UK midpoint.

ItemGuide price (inc VAT)
Tar and chip drive with a new sub-base£43–£72 per m²
Example: 50 m² drive£2,150–£3,600
Example: 100 m² drive£4,300–£7,200
Example: 200 m² drive£8,200–£13,700

As a 2026 guide in Scarborough, tar and chip driveway work runs at about £43–£72 per m² including VAT, so a 100 m² drive is roughly £4,300–£7,200. Guide only; the survey confirms a fixed price.

Covering Scarborough

What applies in Scarborough. Scarborough sits 35 miles from York, within our regular North Yorkshire cover.

Postcodes
YO12, YO11, YO13
Area
North Yorkshire
Nearest towns
none within easy reach
Pricing
Yorkshire and the Humber, about 4% below our UK midpoint
Kerb approvals
The highway authority

The build-up we price

Dressingchippings rolled into bitumenBindersprayed bitumen or emulsionBaseMOT Type 1 or existing sound surfaceEdgeskerbs, setts or cobblesINDICATIVE CROSS-SECTION · NOT TO SCALE

Rules that apply in Scarborough

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

What the price covers

Tar and chip, also called surface dressing, is a layer of bitumen sprayed onto a prepared base and immediately covered with stone chippings, which are rolled in so the surface looks like gravel but behaves like a bound drive.

  • Edges set with kerbs, setts or cobbles
  • Hot bitumen or emulsion sprayed evenly
  • Chippings spread straight onto the binder
  • Rolled to bed the stones in
  • Loose surplus chippings swept up after a few days

Your questions answered

Can I get a free survey in Scarborough?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How much does a tar and chip driveway cost in Scarborough?

As a 2026 guide in Scarborough, tar and chip driveway work runs at about £43–£72 per m² including VAT, so a 100 m² drive is roughly £4,300–£7,200. Edging, drainage and a dropped kerb are priced separately where needed.

Do you work in my part of Scarborough?

We cover Scarborough including YO12, YO11, YO13.

How quickly can work start in Scarborough?

Often 1–3 days depending on base work. We book Scarborough surveys alongside other jobs in North Yorkshire, and give you dates once the specification is agreed.

More we do in Scarborough

Questions about tar and chip driveways in Scarborough? Call, WhatsApp or use the form, and we'll talk it through.

Free survey for new surfacing

Tar and chip driveways in Scarborough: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price