Driveways and paths · North Yorkshire

Tar and chip driveways in Ripon

For tar and chip driveways in Ripon, we measure the area, check the ground and the falls, and give you an itemised price you can compare line by line with any other quote.

RIPON GUIDE£43–£72 per m² inc VAT
Tar and chip driveway with golden chippings leading to a country cottage, typical of tar and chip driveway work

How much should I budget in Ripon?

These Ripon guide prices reflect rates in Yorkshire and the Humber, about 4% below our UK midpoint.

ItemGuide price (inc VAT)
Tar and chip drive with a new sub-base£43–£72 per m²
Example: 50 m² drive£2,150–£3,600
Example: 100 m² drive£4,300–£7,200
Example: 200 m² drive£8,200–£13,700

As a 2026 guide in Ripon, tar and chip driveway work runs at about £43–£72 per m² including VAT, so a 50 m² drive is roughly £2,150–£3,600. Guide only; the survey confirms a fixed price.

Ripon: the local details

The key facts for Ripon. We cover Ripon by grouping surveys with nearby North Yorkshire jobs; York is 22 miles away.

Postcodes
HG4
Area
North Yorkshire
Nearest towns
Harrogate (10 miles), Northallerton (15 miles), York (22 miles)
Pricing
Yorkshire and the Humber, about 4% below our UK midpoint
Kerb approvals
The highway authority

Close to Ripon: Harrogate, Northallerton, York.

Layer by layer

Dressingchippings rolled into bitumenBindersprayed bitumen or emulsionBaseMOT Type 1 or existing sound surfaceEdgeskerbs, setts or cobblesINDICATIVE CROSS-SECTION · NOT TO SCALE

What we do on a tar and chip driveway

Tar and chip, also called surface dressing, is a layer of bitumen sprayed onto a prepared base and immediately covered with stone chippings, which are rolled in so the surface looks like gravel but behaves like a bound drive.

  • Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
  • Edges set with kerbs, setts or cobbles
  • Hot bitumen or emulsion sprayed evenly
  • Loose surplus chippings swept up after a few days
  • Second coat where a double dressing is specified

Planning and kerb rules for Ripon

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

Your questions answered

Can I get a free survey in Ripon?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How long does a tar and chip driveway take in Ripon?

Often 1–3 days depending on base work. We book Ripon surveys alongside other jobs in North Yorkshire, and give you dates once the specification is agreed.

Which Ripon postcodes do you cover?

We cover Ripon including HG4, and nearby Harrogate, Northallerton, York.

How much does a tar and chip driveway cost in Ripon?

As a 2026 guide in Ripon, tar and chip driveway work runs at about £43–£72 per m² including VAT, so a 50 m² drive is roughly £2,150–£3,600. Edging, drainage and a dropped kerb are priced separately where needed.

More we do in Ripon

Tell us what you have in mind for Ripon and we'll book a survey and put the specification in writing.

Free survey for new surfacing

Tar and chip driveways in Ripon: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price