Tar and chip driveways in King's Lynn

Tar and chip driveway prices in King's Lynn

For King's Lynn, we apply the East of England rate, about 5% above our UK midpoint. Your survey turns these ranges into a fixed price.

Item	Guide price (inc VAT)
Tar and chip drive with a new sub-base	£47–£79 per m²
Example: 50 m² drive	£2,350–£3,950
Example: 100 m² drive	£4,700–£7,900
Example: 200 m² drive	£9,000–£14,950

As a 2026 guide in King's Lynn, tar and chip driveway work runs at about £47–£79 per m² including VAT, so a 200 m² drive is roughly £9,000–£14,950. Guide only; the survey confirms a fixed price.

Where we work in and around King's Lynn

King's Lynn at a glance. King's Lynn sits 39 miles from Norwich, within our regular Norfolk cover.

Postcodes: PE30, PE34
Area: Norfolk
Nearest towns: Wisbech (12 miles), East Dereham (23 miles)
Pricing: East of England, about 5% above our UK midpoint
Kerb approvals: The highway authority

Close to King's Lynn: Wisbech, East Dereham.

Layer by layer

Planning and kerb rules for King's Lynn

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

What is included in a tar and chip driveway?

Tar and chip, also called surface dressing, is a layer of bitumen sprayed onto a prepared base and immediately covered with stone chippings, which are rolled in so the surface looks like gravel but behaves like a bound drive.

Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
Edges set with kerbs, setts or cobbles
Hot bitumen or emulsion sprayed evenly
Chippings spread straight onto the binder
Rolled to bed the stones in

Questions about tar and chip driveways in King's Lynn

How long will the work take at my King's Lynn property?

Often 1–3 days depending on base work. We book King's Lynn surveys alongside other jobs in Norfolk, and give you dates once the specification is agreed.

Tar and chip driveway cost in King's Lynn: what should I budget?

As a 2026 guide in King's Lynn, tar and chip driveway work runs at about £47–£79 per m² including VAT, so a 200 m² drive is roughly £9,000–£14,950. Edging, drainage and a dropped kerb are priced separately where needed.

Are there planning or highway rules in King's Lynn?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Will someone visit before I get a fixed price in King's Lynn?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Other work in King's Lynn

Tell us what you have in mind for King's Lynn and we'll book a survey and put the specification in writing.