Driveways and paths · Merseyside

Tar and chip driveways in Halewood

If you are weighing up tar and chip driveways in Halewood, the useful questions are about depth, edges and drainage. That's what our survey checks and what your quote spells out.

HALEWOOD GUIDE£44–£73 per m² inc VAT
Tar and chip driveway with golden chippings leading to a country cottage, typical of tar and chip driveway work

What does a tar and chip driveway cost in Halewood?

For Halewood, we apply the North West rate, about 3% below our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
Tar and chip drive with a new sub-base£44–£73 per m²
Example: 50 m² drive£2,200–£3,650
Example: 100 m² drive£4,350–£7,300
Example: 200 m² drive£8,300–£13,800

As a 2026 guide in Halewood, tar and chip driveway work runs at about £44–£73 per m² including VAT, so a 100 m² drive is roughly £4,350–£7,300. Guide only; the survey confirms a fixed price.

What we do on a tar and chip driveway

Hot bitumen sprayed and dressed with rolled stone chippings for a gravel look that stays put.

  • Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
  • Hot bitumen or emulsion sprayed evenly
  • Rolled to bed the stones in
  • Loose surplus chippings swept up after a few days
  • Second coat where a double dressing is specified

Covering Halewood

Halewood at a glance. Halewood is covered on our Merseyside rounds, 7 miles from Liverpool.

Postcodes
L26, L25
Area
Merseyside
Nearest towns
Speke (1 mile), Garston (3 miles), Huyton (4 miles), Widnes (4 miles)
Pricing
North West, about 3% below our UK midpoint
Kerb approvals
The highway authority

The same service is available in Speke, Garston, Huyton, Widnes, Runcorn.

Do I need permission in Halewood?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

Layer by layer

Dressingchippings rolled into bitumenBindersprayed bitumen or emulsionBaseMOT Type 1 or existing sound surfaceEdgeskerbs, setts or cobblesINDICATIVE CROSS-SECTION · NOT TO SCALE

Your questions answered

Can I get a free survey in Halewood?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Are there planning or highway rules in Halewood?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Which Halewood postcodes do you cover?

We cover Halewood including L26, L25, and nearby Speke, Garston, Huyton.

How long will the work take at my Halewood property?

Often 1–3 days depending on base work. We book Halewood surveys alongside other jobs in Merseyside, and give you dates once the specification is agreed.

Other work in Halewood

Questions about tar and chip driveways in Halewood? Call, WhatsApp or use the form, and we'll talk it through.

Free survey for new surfacing

Tar and chip driveways in Halewood: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price