Tar and chip driveways in Bootle
A good tar and chip driveway in Bootle looks the same as a poor one on the day it is laid. The difference shows a few winters later, which is why our quotes list what goes underneath.

Tar and chip driveway prices in Bootle
Guide prices below are for Bootle, adjusted for the North West, where surfacing rates run about 3% below our UK midpoint.
| Item | Guide price (inc VAT) |
|---|---|
| Tar and chip drive with a new sub-base | £44–£73 per m² |
| Example: 50 m² drive | £2,200–£3,650 |
| Example: 100 m² drive | £4,350–£7,300 |
| Example: 200 m² drive | £8,300–£13,800 |
As a 2026 guide in Bootle, tar and chip driveway work runs at about £44–£73 per m² including VAT, so a 100 m² drive is roughly £4,350–£7,300. Guide only; the survey confirms a fixed price.
What is included in a tar and chip driveway?
Tar and chip, also called surface dressing, is a layer of bitumen sprayed onto a prepared base and immediately covered with stone chippings, which are rolled in so the surface looks like gravel but behaves like a bound drive.
- Edges set with kerbs, setts or cobbles
- Hot bitumen or emulsion sprayed evenly
- Chippings spread straight onto the binder
- Rolled to bed the stones in
- Loose surplus chippings swept up after a few days
The build-up we price
Bootle: the local details
What applies in Bootle. Bootle is 4 miles from Liverpool, and we survey there as part of Merseyside cover.
- Postcodes
- L22, L23
- Area
- Merseyside
- Nearest towns
- Litherland (1 mile), Wallasey (4 miles), Liverpool (4 miles), Maghull (5 miles)
- Pricing
- North West, about 3% below our UK midpoint
- Kerb approvals
- The highway authority
We also cover nearby Litherland, Wallasey, Liverpool, Maghull, Birkenhead.
Planning and kerb rules for Bootle
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.
Questions about tar and chip driveways in Bootle
Are there planning or highway rules in Bootle?
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).
How quickly can work start in Bootle?
Often 1–3 days depending on base work. We book Bootle surveys alongside other jobs in Merseyside, and give you dates once the specification is agreed.
Which Bootle postcodes do you cover?
We cover Bootle including L22, L23, and nearby Litherland, Wallasey, Liverpool.
Is the survey in Bootle free?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
Also in Bootle
- Red tarmac driveways
- Tarmac paths and footpaths
- Tarmac driveway resurfacing
- Private and access road surfacing
- Permeable tarmac driveways
- Car park resurfacing
- Everything in Bootle
Tell us what you have in mind for Bootle and we'll book a survey and put the specification in writing.
Tar and chip driveways in Bootle: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED