Tar and chip driveways in Louth
For tar and chip driveways in Louth, we measure the area, check the ground and the falls, and give you an itemised price you can compare line by line with any other quote.

How much should I budget in Louth?
Guide prices below are for Louth, adjusted for the East Midlands, where surfacing rates run about 2% below our UK midpoint.
| Item | Guide price (inc VAT) |
|---|---|
| Tar and chip drive with a new sub-base | £44–£74 per m² |
| Example: 50 m² drive | £2,200–£3,700 |
| Example: 100 m² drive | £4,400–£7,350 |
| Example: 200 m² drive | £8,400–£13,950 |
As a 2026 guide in Louth, tar and chip driveway work runs at about £44–£74 per m² including VAT, so a 100 m² drive is roughly £4,400–£7,350. Guide only; the survey confirms a fixed price.
Planning and kerb rules for Louth
In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).
Layer by layer
What the price covers
Tar and chip, also called surface dressing, is a layer of bitumen sprayed onto a prepared base and immediately covered with stone chippings, which are rolled in so the surface looks like gravel but behaves like a bound drive.
- Edges set with kerbs, setts or cobbles
- Hot bitumen or emulsion sprayed evenly
- Chippings spread straight onto the binder
- Rolled to bed the stones in
- Second coat where a double dressing is specified
Where we work in and around Louth
The key facts for Louth. Louth is covered on our Lincolnshire rounds, 24 miles from Lincoln.
- Postcodes
- LN11
- Area
- Lincolnshire
- Nearest towns
- Cleethorpes (13 miles), Grimsby (14 miles), Skegness (21 miles), Lincoln (24 miles)
- Pricing
- East Midlands, about 2% below our UK midpoint
- Kerb approvals
- The highway authority
The same service is available in Cleethorpes, Grimsby, Skegness, Lincoln.
Your questions answered
What is the price of a tar and chip driveway in Louth?
As a 2026 guide in Louth, tar and chip driveway work runs at about £44–£74 per m² including VAT, so a 100 m² drive is roughly £4,400–£7,350. Edging, drainage and a dropped kerb are priced separately where needed.
Is the survey in Louth free?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
How long will the work take at my Louth property?
Often 1–3 days depending on base work. We book Louth surveys alongside other jobs in Lincolnshire, and give you dates once the specification is agreed.
What approvals apply in Louth?
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).
More we do in Louth
- Permeable tarmac driveways
- Tarmac paths and footpaths
- New tarmac driveways
- Red tarmac driveways
- Private and access road surfacing
- Tarmac driveway resurfacing
- Everything in Louth
Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Louth.
Tar and chip driveways in Louth: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED