Driveways and paths · Lancashire

Tar and chip driveways in Ormskirk

A good tar and chip driveway in Ormskirk looks the same as a poor one on the day it is laid. The difference shows a few winters later, which is why our quotes list what goes underneath.

ORMSKIRK GUIDE£44–£73 per m² inc VAT
Tar and chip driveway with golden chippings leading to a country cottage, typical of tar and chip driveway work

What does a tar and chip driveway cost in Ormskirk?

Guide prices below are for Ormskirk, adjusted for the North West, where surfacing rates run about 3% below our UK midpoint.

ItemGuide price (inc VAT)
Tar and chip drive with a new sub-base£44–£73 per m²
Example: 50 m² drive£2,200–£3,650
Example: 100 m² drive£4,350–£7,300
Example: 200 m² drive£8,300–£13,800

As a 2026 guide in Ormskirk, tar and chip driveway work runs at about £44–£73 per m² including VAT, so a 200 m² drive is roughly £8,300–£13,800. Guide only; the survey confirms a fixed price.

Rules that apply in Ormskirk

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

What is included in a tar and chip driveway?

Tar and chip, also called surface dressing, is a layer of bitumen sprayed onto a prepared base and immediately covered with stone chippings, which are rolled in so the surface looks like gravel but behaves like a bound drive.

  • Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
  • Hot bitumen or emulsion sprayed evenly
  • Chippings spread straight onto the binder
  • Rolled to bed the stones in
  • Loose surplus chippings swept up after a few days

Layer by layer

Dressingchippings rolled into bitumenBindersprayed bitumen or emulsionBaseMOT Type 1 or existing sound surfaceEdgeskerbs, setts or cobblesINDICATIVE CROSS-SECTION · NOT TO SCALE

Covering Ormskirk

The key facts for Ormskirk. We cover Ormskirk by grouping surveys with nearby Lancashire jobs; Preston is 15 miles away.

Postcodes
L39, L40
Area
Lancashire
Nearest towns
Maghull (4 miles), Skelmersdale (5 miles), Kirkby (6 miles), Southport (8 miles)
Pricing
North West, about 3% below our UK midpoint
Kerb approvals
The highway authority

Nearby, we work in Maghull, Skelmersdale, Kirkby, Southport, Formby.

Your questions answered

Are there planning or highway rules in Ormskirk?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Tar and chip driveway cost in Ormskirk: what should I budget?

As a 2026 guide in Ormskirk, tar and chip driveway work runs at about £44–£73 per m² including VAT, so a 200 m² drive is roughly £8,300–£13,800. Edging, drainage and a dropped kerb are priced separately where needed.

Is the survey in Ormskirk free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do you work in my part of Ormskirk?

We cover Ormskirk including L39, L40, and nearby Maghull, Skelmersdale, Kirkby.

More we do in Ormskirk

Ready for a price in Ormskirk? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

Tar and chip driveways in Ormskirk: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price