Driveways and paths · Gwynedd

Tar and chip driveways in Bangor, Gwynedd

If you are weighing up tar and chip driveways in Bangor, Gwynedd, the useful questions are about depth, edges and drainage. That's what our survey checks and what your quote spells out.

BANGOR, GWYNEDD GUIDE£43–£71 per m² inc VAT
Tar and chip driveway with golden chippings leading to a country cottage, typical of tar and chip driveway work

What does a tar and chip driveway cost in Bangor, Gwynedd?

For Bangor, Gwynedd, we apply the Welsh rate, about 5% below our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
Tar and chip drive with a new sub-base£43–£71 per m²
Example: 50 m² drive£2,150–£3,550
Example: 100 m² drive£4,300–£7,100
Example: 200 m² drive£8,100–£13,550

As a 2026 guide in Bangor, Gwynedd, tar and chip driveway work runs at about £43–£71 per m² including VAT, so a 200 m² drive is roughly £8,100–£13,550. Guide only; the survey confirms a fixed price.

What is included in a tar and chip driveway?

Hot bitumen sprayed and dressed with rolled stone chippings for a gravel look that stays put.

  • Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
  • Edges set with kerbs, setts or cobbles
  • Hot bitumen or emulsion sprayed evenly
  • Chippings spread straight onto the binder
  • Second coat where a double dressing is specified

How it is built

Dressingchippings rolled into bitumenBindersprayed bitumen or emulsionBaseMOT Type 1 or existing sound surfaceEdgeskerbs, setts or cobblesINDICATIVE CROSS-SECTION · NOT TO SCALE

Bangor, Gwynedd: the local details

What applies in Bangor, Gwynedd. Bangor, Gwynedd is covered on our Gwynedd rounds, under a mile from Bangor, Gwynedd.

Postcodes
LL59, LL57, LL58, LL75
Area
Gwynedd
Nearest towns
Caernarfon (8 miles), Holyhead (21 miles)
Pricing
Wales, about 5% below our UK midpoint
Kerb approvals
The council

The same service is available in Caernarfon, Holyhead.

Rules that apply in Bangor, Gwynedd

In Wales, a new hard surface in front of a house is permitted development only if it is porous or drains to a permeable area within the property; repairing or replacing up to 5 m² of existing hardstanding is allowed without meeting that condition. Separately, since January 2019, construction covering 100 m² or more that affects drainage generally needs approval from the council's SuDS Approving Body (SAB) before work starts, even where planning permission is not needed. Larger drives, shared surfaces and car parks often reach that threshold. A vehicle crossing over the footway is a separate approval, from the council as highway authority.

Questions about tar and chip driveways in Bangor, Gwynedd

Are there planning or highway rules in Bangor, Gwynedd?

In Wales, new front hardstanding should be porous or drain to a permeable area within the property, and work covering 100 m² or more with drainage effects usually needs SAB approval first. Dropped kerbs are approved by the council as highway authority.

Will someone visit before I get a fixed price in Bangor, Gwynedd?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

What is the price of a tar and chip driveway in Bangor, Gwynedd?

As a 2026 guide in Bangor, Gwynedd, tar and chip driveway work runs at about £43–£71 per m² including VAT, so a 200 m² drive is roughly £8,100–£13,550. Edging, drainage and a dropped kerb are priced separately where needed.

Do you cover all of Bangor, Gwynedd?

We cover Bangor, Gwynedd including LL59, LL57, LL58, LL75, and nearby Caernarfon, Holyhead.

Also in Bangor, Gwynedd

Ready for a price in Bangor, Gwynedd? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

Tar and chip driveways in Bangor, Gwynedd: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price