Driveways and paths · Greater Manchester

Tar and chip driveways in Radcliffe

Every tar and chip driveway we price in Radcliffe comes with a written specification, so the dig depth, sub-base, binder course and surface course are on paper before anything is agreed.

RADCLIFFE GUIDE£44–£73 per m² inc VAT
Tar and chip driveway with golden chippings leading to a country cottage, typical of tar and chip driveway work

Tar and chip driveway prices in Radcliffe

Local guide rates for Radcliffe (the North West, about 3% below our UK midpoint):

ItemGuide price (inc VAT)
Tar and chip drive with a new sub-base£44–£73 per m²
Example: 50 m² drive£2,200–£3,650
Example: 100 m² drive£4,350–£7,300
Example: 200 m² drive£8,300–£13,800

As a 2026 guide in Radcliffe, tar and chip driveway work runs at about £44–£73 per m² including VAT, so a 50 m² drive is roughly £2,200–£3,650. Guide only; the survey confirms a fixed price.

Where we work in and around Radcliffe

Radcliffe at a glance. Radcliffe is covered on our Greater Manchester rounds, 7 miles from Manchester.

Postcodes
M26
Area
Greater Manchester
Nearest towns
Whitefield (1 mile), Prestwich (3 miles), Bury (3 miles), Farnworth (3 miles)
Pricing
North West, about 3% below our UK midpoint
Kerb approvals
The highway authority

The same service is available in Whitefield, Prestwich, Bury, Farnworth, Walkden.

Do I need permission in Radcliffe?

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

What we do on a tar and chip driveway

Tar and chip, also called surface dressing, is a layer of bitumen sprayed onto a prepared base and immediately covered with stone chippings, which are rolled in so the surface looks like gravel but behaves like a bound drive.

  • Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
  • Hot bitumen or emulsion sprayed evenly
  • Chippings spread straight onto the binder
  • Loose surplus chippings swept up after a few days
  • Second coat where a double dressing is specified

The build-up we price

Dressingchippings rolled into bitumenBindersprayed bitumen or emulsionBaseMOT Type 1 or existing sound surfaceEdgeskerbs, setts or cobblesINDICATIVE CROSS-SECTION · NOT TO SCALE

Questions about tar and chip driveways in Radcliffe

Do you cover all of Radcliffe?

We cover Radcliffe including M26, and nearby Whitefield, Prestwich, Bury.

What is the price of a tar and chip driveway in Radcliffe?

As a 2026 guide in Radcliffe, tar and chip driveway work runs at about £44–£73 per m² including VAT, so a 50 m² drive is roughly £2,200–£3,650. Edging, drainage and a dropped kerb are priced separately where needed.

Can I get a free survey in Radcliffe?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do I need permission for a tar and chip driveway in Radcliffe?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Also in Radcliffe

Questions about tar and chip driveways in Radcliffe? Call, WhatsApp or use the form, and we'll talk it through.

Free survey for new surfacing

Tar and chip driveways in Radcliffe: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price