Driveways and paths · Greater London

Tar and chip driveways in Southall

Tar and chip driveways in Southall start with the parts you won't see: how deep the ground is dug, how much stone goes back in, and where the rain will run once the drive is sealed.

SOUTHALL GUIDE£54–£90 per m² inc VAT
Tar and chip driveway with golden chippings leading to a country cottage, typical of tar and chip driveway work

What does a tar and chip driveway cost in Southall?

Local guide rates for Southall (London, about 20% above our UK midpoint):

ItemGuide price (inc VAT)
Tar and chip drive with a new sub-base£54–£90 per m²
Example: 50 m² drive£2,700–£4,500
Example: 100 m² drive£5,400–£9,000
Example: 200 m² drive£10,250–£17,100

As a 2026 guide in Southall, tar and chip driveway work runs at about £54–£90 per m² including VAT, so a 50 m² drive is roughly £2,700–£4,500. Guide only; the survey confirms a fixed price.

What is included in a tar and chip driveway?

Hot bitumen sprayed and dressed with rolled stone chippings for a gravel look that stays put.

  • Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
  • Edges set with kerbs, setts or cobbles
  • Chippings spread straight onto the binder
  • Loose surplus chippings swept up after a few days
  • Second coat where a double dressing is specified

Southall: the local details

What applies in Southall. We cover Southall as part of our regular Greater London rounds.

Postcodes
UB1, UB2
Area
Greater London
Nearest towns
Greenford (2 miles), Heston (2 miles), Hayes (2 miles), Isleworth (3 miles)
Pricing
London, about 20% above our UK midpoint
Kerb approvals
The highway authority

The same service is available in Greenford, Heston, Hayes, Isleworth, Northolt.

Planning and kerb rules for Southall

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

Questions about tar and chip driveways in Southall

Tar and chip driveway cost in Southall: what should I budget?

As a 2026 guide in Southall, tar and chip driveway work runs at about £54–£90 per m² including VAT, so a 50 m² drive is roughly £2,700–£4,500. Edging, drainage and a dropped kerb are priced separately where needed.

Can I get a free survey in Southall?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do I need permission for a tar and chip driveway in Southall?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

How long does a tar and chip driveway take in Southall?

Often 1–3 days depending on base work. We book Southall surveys alongside other jobs in Greater London, and give you dates once the specification is agreed.

Also in Southall

Ready for a price in Southall? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

Tar and chip driveways in Southall: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price