Tar and chip driveways in Dunblane
Homeowners in Dunblane ask us about tar and chip driveways for the same reason: a surface that stays flat, drains properly and still looks tidy in ten years. That comes down to the build underneath.
How much should I budget in Dunblane?
Guide prices below are for Dunblane, adjusted for Scotland, where surfacing rates run about 2% below our UK midpoint.
| Item | Guide price (inc VAT) |
|---|---|
| Tar and chip drive with a new sub-base | £44–£74 per m² |
| Example: 50 m² drive | £2,200–£3,700 |
| Example: 100 m² drive | £4,400–£7,350 |
| Example: 200 m² drive | £8,400–£13,950 |
As a 2026 guide in Dunblane, tar and chip driveway work runs at about £44–£74 per m² including VAT, so a 200 m² drive is roughly £8,400–£13,950. Guide only; the survey confirms a fixed price.
What we do on a tar and chip driveway
Hot bitumen sprayed and dressed with rolled stone chippings for a gravel look that stays put.
- Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
- Edges set with kerbs, setts or cobbles
- Chippings spread straight onto the binder
- Rolled to bed the stones in
- Loose surplus chippings swept up after a few days
Do I need permission in Dunblane?
In Scotland, a hard surface between the house and a road is permitted development only if it is porous or drains to a porous area within the property, whatever its size. Any new or widened crossing over the pavement needs approval from the council as roads authority.
Layer by layer
Dunblane: the local details
Dunblane at a glance. Dunblane is covered on our Forth Valley rounds, 5 miles from Stirling.
- Postcodes
- FK15, FK16
- Area
- Forth Valley
- Nearest towns
- Stirling (5 miles), Alloa (8 miles), Stenhousemuir (13 miles), Larbert (13 miles)
- Pricing
- Scotland, about 2% below our UK midpoint
- Kerb approvals
- The council
The same service is available in Stirling, Alloa, Stenhousemuir, Larbert, Falkirk.
Dunblane: common questions
Are there planning or highway rules in Dunblane?
In Scotland, a hard surface between the house and a road is permitted development only if it is porous or drains to a porous area within the property, whatever its size. Dropped kerbs are approved by the council as roads authority.
Do you work in my part of Dunblane?
We cover Dunblane including FK15, FK16, and nearby Stirling, Alloa, Stenhousemuir.
How much does a tar and chip driveway cost in Dunblane?
As a 2026 guide in Dunblane, tar and chip driveway work runs at about £44–£74 per m² including VAT, so a 200 m² drive is roughly £8,400–£13,950. Edging, drainage and a dropped kerb are priced separately where needed.
Can I get a free survey in Dunblane?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
Also in Dunblane
- Car park surfacing
- Car park and yard repairs
- Front garden to tarmac driveway
- Tarmac driveway repairs
- Tarmac paths and footpaths
- Private and access road surfacing
- Everything in Dunblane
Questions about tar and chip driveways in Dunblane? Call, WhatsApp or use the form, and we'll talk it through.
Tar and chip driveways in Dunblane: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED