Driveways and paths · Essex

Tar and chip driveways in Grays

Planning a tar and chip driveway in Grays? We'll measure up, look at the edges and drainage, and set the specification out in writing before you commit to anything.

GRAYS GUIDE£47–£79 per m² inc VAT
Tar and chip driveway with golden chippings leading to a country cottage, typical of tar and chip driveway work

Tar and chip driveway prices in Grays

Local guide rates for Grays (the East of England, about 5% above our UK midpoint):

ItemGuide price (inc VAT)
Tar and chip drive with a new sub-base£47–£79 per m²
Example: 50 m² drive£2,350–£3,950
Example: 100 m² drive£4,700–£7,900
Example: 200 m² drive£9,000–£14,950

As a 2026 guide in Grays, tar and chip driveway work runs at about £47–£79 per m² including VAT, so a 100 m² drive is roughly £4,700–£7,900. Guide only; the survey confirms a fixed price.

Grays: the local details

What applies in Grays. Grays is one of the bigger places we cover in Essex, so survey slots come round regularly.

Postcodes
RM17, RM16, RM20
Area
Essex
Nearest towns
Swanscombe (2 miles), South Ockendon (3 miles), Gravesend (3 miles), Dartford (5 miles)
Pricing
East of England, about 5% above our UK midpoint
Kerb approvals
The highway authority

Close to Grays: Swanscombe, South Ockendon, Gravesend, Dartford, Stanford-le-Hope.

Do I need permission in Grays?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

What the price covers

Hot bitumen sprayed and dressed with rolled stone chippings for a gravel look that stays put.

  • Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
  • Hot bitumen or emulsion sprayed evenly
  • Chippings spread straight onto the binder
  • Rolled to bed the stones in
  • Loose surplus chippings swept up after a few days

Questions about tar and chip driveways in Grays

Do you work in my part of Grays?

We cover Grays including RM17, RM16, RM20, and nearby Swanscombe, South Ockendon, Gravesend.

How long does a tar and chip driveway take in Grays?

Often 1–3 days depending on base work. We book Grays surveys alongside other jobs in Essex, and give you dates once the specification is agreed.

Tar and chip driveway cost in Grays: what should I budget?

As a 2026 guide in Grays, tar and chip driveway work runs at about £47–£79 per m² including VAT, so a 100 m² drive is roughly £4,700–£7,900. Edging, drainage and a dropped kerb are priced separately where needed.

What approvals apply in Grays?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Other work in Grays

Ready for a price in Grays? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

Tar and chip driveways in Grays: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price