Driveways and paths · East Riding of Yorkshire

Tar and chip driveways in Bridlington

We survey and price tar and chip driveways across Bridlington and the YO16, YO15 postcodes, with every layer and its depth written into the quote.

BRIDLINGTON GUIDE£43–£72 per m² inc VAT
Tar and chip driveway with golden chippings leading to a country cottage, typical of tar and chip driveway work

How much should I budget in Bridlington?

Local guide rates for Bridlington (Yorkshire and the Humber, about 4% below our UK midpoint):

ItemGuide price (inc VAT)
Tar and chip drive with a new sub-base£43–£72 per m²
Example: 50 m² drive£2,150–£3,600
Example: 100 m² drive£4,300–£7,200
Example: 200 m² drive£8,200–£13,700

As a 2026 guide in Bridlington, tar and chip driveway work runs at about £43–£72 per m² including VAT, so a 100 m² drive is roughly £4,300–£7,200. Guide only; the survey confirms a fixed price.

What is included in a tar and chip driveway?

Tar and chip, also called surface dressing, is a layer of bitumen sprayed onto a prepared base and immediately covered with stone chippings, which are rolled in so the surface looks like gravel but behaves like a bound drive.

  • Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
  • Edges set with kerbs, setts or cobbles
  • Hot bitumen or emulsion sprayed evenly
  • Rolled to bed the stones in
  • Loose surplus chippings swept up after a few days

Planning and kerb rules for Bridlington

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

Covering Bridlington

The key facts for Bridlington. Bridlington is 24 miles from Kingston upon Hull, and we survey there as part of East Riding of Yorkshire cover.

Postcodes
YO16, YO15
Area
East Riding of Yorkshire
Nearest towns
Driffield (12 miles), Beverley (19 miles), Kingston upon Hull (24 miles)
Pricing
Yorkshire and the Humber, about 4% below our UK midpoint
Kerb approvals
The highway authority

Close to Bridlington: Driffield, Beverley, Kingston upon Hull.

How it is built

Dressingchippings rolled into bitumenBindersprayed bitumen or emulsionBaseMOT Type 1 or existing sound surfaceEdgeskerbs, setts or cobblesINDICATIVE CROSS-SECTION · NOT TO SCALE

Bridlington: common questions

What approvals apply in Bridlington?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Can I get a free survey in Bridlington?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Tar and chip driveway cost in Bridlington: what should I budget?

As a 2026 guide in Bridlington, tar and chip driveway work runs at about £43–£72 per m² including VAT, so a 100 m² drive is roughly £4,300–£7,200. Edging, drainage and a dropped kerb are priced separately where needed.

Which Bridlington postcodes do you cover?

We cover Bridlington including YO16, YO15, and nearby Driffield, Beverley, Kingston upon Hull.

Also in Bridlington

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Bridlington.

Free survey for new surfacing

Tar and chip driveways in Bridlington: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price