Tar and chip driveways in Milford Haven

How much should I budget in Milford Haven?

These Milford Haven guide prices reflect rates in Wales, about 5% below our UK midpoint.

Item	Guide price (inc VAT)
Tar and chip drive with a new sub-base	£43–£71 per m²
Example: 50 m² drive	£2,150–£3,550
Example: 100 m² drive	£4,300–£7,100
Example: 200 m² drive	£8,100–£13,550

As a 2026 guide in Milford Haven, tar and chip driveway work runs at about £43–£71 per m² including VAT, so a 50 m² drive is roughly £2,150–£3,550. Guide only; the survey confirms a fixed price.

Planning and kerb rules for Milford Haven

In Wales, new front hardstanding should be porous or drain to a permeable area within the property, and work covering 100 m² or more with drainage effects usually needs SAB approval first. A vehicle crossing over the footway is a separate approval, from the council as highway authority.

Where we work in and around Milford Haven

The key facts for Milford Haven. Milford Haven is covered on our Dyfed rounds, 37 miles from Llanelli.

Postcodes: SA73
Area: Dyfed
Nearest towns: Pembroke Dock (4 miles), Haverfordwest (7 miles)
Pricing: Wales, about 5% below our UK midpoint
Kerb approvals: The council

We also cover nearby Pembroke Dock, Haverfordwest.

What is included in a tar and chip driveway?

Hot bitumen sprayed and dressed with rolled stone chippings for a gravel look that stays put.

Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
Edges set with kerbs, setts or cobbles
Hot bitumen or emulsion sprayed evenly
Chippings spread straight onto the binder
Rolled to bed the stones in

Your questions answered

Do you cover all of Milford Haven?

We cover Milford Haven including SA73, and nearby Pembroke Dock, Haverfordwest.

How long does a tar and chip driveway take in Milford Haven?

Often 1–3 days depending on base work. We book Milford Haven surveys alongside other jobs in Dyfed, and give you dates once the specification is agreed.

Tar and chip driveway cost in Milford Haven: what should I budget?

As a 2026 guide in Milford Haven, tar and chip driveway work runs at about £43–£71 per m² including VAT, so a 50 m² drive is roughly £2,150–£3,550. Edging, drainage and a dropped kerb are priced separately where needed.

Will someone visit before I get a fixed price in Milford Haven?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

More we do in Milford Haven

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Milford Haven.