Driveways and paths · Derbyshire

Tar and chip driveways in Heanor

Homeowners in Heanor ask us about tar and chip driveways for the same reason: a surface that stays flat, drains properly and still looks tidy in ten years. That comes down to the build underneath.

HEANOR GUIDE£44–£74 per m² inc VAT
Tar and chip driveway with golden chippings leading to a country cottage, typical of tar and chip driveway work

What does a tar and chip driveway cost in Heanor?

For Heanor, we apply the East Midlands rate, about 2% below our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
Tar and chip drive with a new sub-base£44–£74 per m²
Example: 50 m² drive£2,200–£3,700
Example: 100 m² drive£4,400–£7,350
Example: 200 m² drive£8,400–£13,950

As a 2026 guide in Heanor, tar and chip driveway work runs at about £44–£74 per m² including VAT, so a 100 m² drive is roughly £4,400–£7,350. Guide only; the survey confirms a fixed price.

Covering Heanor

The key facts for Heanor. We cover Heanor by grouping surveys with nearby Derbyshire jobs; Derby is 8 miles away.

Postcodes
DE75
Area
Derbyshire
Nearest towns
Ripley (2 miles), Eastwood (2 miles), Ilkeston (4 miles), Belper (5 miles)
Pricing
East Midlands, about 2% below our UK midpoint
Kerb approvals
The highway authority

Close to Heanor: Ripley, Eastwood, Ilkeston, Belper, Alfreton.

What the price covers

Hot bitumen sprayed and dressed with rolled stone chippings for a gravel look that stays put.

  • Edges set with kerbs, setts or cobbles
  • Chippings spread straight onto the binder
  • Rolled to bed the stones in
  • Loose surplus chippings swept up after a few days
  • Second coat where a double dressing is specified

Layer by layer

Dressingchippings rolled into bitumenBindersprayed bitumen or emulsionBaseMOT Type 1 or existing sound surfaceEdgeskerbs, setts or cobblesINDICATIVE CROSS-SECTION · NOT TO SCALE

Do I need permission in Heanor?

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

Your questions answered

How much does a tar and chip driveway cost in Heanor?

As a 2026 guide in Heanor, tar and chip driveway work runs at about £44–£74 per m² including VAT, so a 100 m² drive is roughly £4,400–£7,350. Edging, drainage and a dropped kerb are priced separately where needed.

Do you cover all of Heanor?

We cover Heanor including DE75, and nearby Ripley, Eastwood, Ilkeston.

Will someone visit before I get a fixed price in Heanor?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How long will the work take at my Heanor property?

Often 1–3 days depending on base work. We book Heanor surveys alongside other jobs in Derbyshire, and give you dates once the specification is agreed.

More we do in Heanor

Tell us what you have in mind for Heanor and we'll book a survey and put the specification in writing.

Free survey for new surfacing

Tar and chip driveways in Heanor: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price