Driveways and paths · County Antrim

Tar and chip driveways in Ballymoney

Every tar and chip driveway we price in Ballymoney comes with a written specification, so the dig depth, sub-base, binder course and surface course are on paper before anything is agreed.

BALLYMONEY GUIDE£40–£66 per m² inc VAT
Tar and chip driveway with golden chippings leading to a country cottage, typical of tar and chip driveway work

How much should I budget in Ballymoney?

Local guide rates for Ballymoney (Northern Ireland, about 12% below our UK midpoint):

ItemGuide price (inc VAT)
Tar and chip drive with a new sub-base£40–£66 per m²
Example: 50 m² drive£2,000–£3,300
Example: 100 m² drive£3,950–£6,600
Example: 200 m² drive£7,500–£12,550

As a 2026 guide in Ballymoney, tar and chip driveway work runs at about £40–£66 per m² including VAT, so a 50 m² drive is roughly £2,000–£3,300. Guide only; the survey confirms a fixed price.

Do I need permission in Ballymoney?

In Northern Ireland, more than 5 m² of hard surface in front of a house should be porous or drain to a porous area within the property; DfI Roads approves dropped kerbs. Any new or widened crossing over the pavement needs approval from DfI Roads.

The build-up we price

Dressingchippings rolled into bitumenBindersprayed bitumen or emulsionBaseMOT Type 1 or existing sound surfaceEdgeskerbs, setts or cobblesINDICATIVE CROSS-SECTION · NOT TO SCALE

Where we work in and around Ballymoney

Survey cover and pricing for Ballymoney. Ballymoney is covered on our County Antrim rounds, 40 miles from Belfast.

Postcodes
BT53
Area
County Antrim
Nearest towns
Coleraine (8 miles), Portrush (10 miles), Portstewart (11 miles), Ballymena (17 miles)
Pricing
Northern Ireland, about 12% below our UK midpoint
Kerb approvals
DfI Roads

We also cover nearby Coleraine, Portrush, Portstewart, Ballymena.

What is included in a tar and chip driveway?

Tar and chip, also called surface dressing, is a layer of bitumen sprayed onto a prepared base and immediately covered with stone chippings, which are rolled in so the surface looks like gravel but behaves like a bound drive.

  • Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
  • Edges set with kerbs, setts or cobbles
  • Hot bitumen or emulsion sprayed evenly
  • Chippings spread straight onto the binder
  • Rolled to bed the stones in

Your questions answered

Do you work in my part of Ballymoney?

We cover Ballymoney including BT53, and nearby Coleraine, Portrush, Portstewart.

How long will the work take at my Ballymoney property?

Often 1–3 days depending on base work. We book Ballymoney surveys alongside other jobs in County Antrim, and give you dates once the specification is agreed.

What approvals apply in Ballymoney?

In Northern Ireland, more than 5 m² of hard surface in front of a house should be porous or drain to a porous area within the property; DfI Roads approves dropped kerbs. Dropped kerbs are approved by DfI Roads.

What is the price of a tar and chip driveway in Ballymoney?

As a 2026 guide in Ballymoney, tar and chip driveway work runs at about £40–£66 per m² including VAT, so a 50 m² drive is roughly £2,000–£3,300. Edging, drainage and a dropped kerb are priced separately where needed.

Also in Ballymoney

Ready for a price in Ballymoney? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

Tar and chip driveways in Ballymoney: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price