Driveways and paths · Clwyd

Tar and chip driveways in Deeside

Every tar and chip driveway we price in Deeside comes with a written specification, so the dig depth, sub-base, binder course and surface course are on paper before anything is agreed.

DEESIDE GUIDE£43–£71 per m² inc VAT
Tar and chip driveway with golden chippings leading to a country cottage, typical of tar and chip driveway work

Tar and chip driveway prices in Deeside

Guide prices below are for Deeside, adjusted for Wales, where surfacing rates run about 5% below our UK midpoint.

ItemGuide price (inc VAT)
Tar and chip drive with a new sub-base£43–£71 per m²
Example: 50 m² drive£2,150–£3,550
Example: 100 m² drive£4,300–£7,100
Example: 200 m² drive£8,100–£13,550

As a 2026 guide in Deeside, tar and chip driveway work runs at about £43–£71 per m² including VAT, so a 50 m² drive is roughly £2,150–£3,550. Guide only; the survey confirms a fixed price.

Rules that apply in Deeside

In Wales, new front hardstanding should be porous or drain to a permeable area within the property, and work covering 100 m² or more with drainage effects usually needs SAB approval first. Any new or widened crossing over the pavement needs approval from the council as highway authority.

What the price covers

Tar and chip, also called surface dressing, is a layer of bitumen sprayed onto a prepared base and immediately covered with stone chippings, which are rolled in so the surface looks like gravel but behaves like a bound drive.

  • Edges set with kerbs, setts or cobbles
  • Chippings spread straight onto the binder
  • Rolled to bed the stones in
  • Loose surplus chippings swept up after a few days
  • Second coat where a double dressing is specified

Covering Deeside

What applies in Deeside. Deeside is 11 miles from Wrexham, and we survey there as part of Clwyd cover.

Postcodes
CH5
Area
Clwyd
Nearest towns
Hawarden (1 mile), Buckley (3 miles), Mold (5 miles), Flint (5 miles)
Pricing
Wales, about 5% below our UK midpoint
Kerb approvals
The council

Close to Deeside: Hawarden, Buckley, Mold, Flint, Wrexham.

The build-up we price

Dressingchippings rolled into bitumenBindersprayed bitumen or emulsionBaseMOT Type 1 or existing sound surfaceEdgeskerbs, setts or cobblesINDICATIVE CROSS-SECTION · NOT TO SCALE

Deeside: common questions

Will someone visit before I get a fixed price in Deeside?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How quickly can work start in Deeside?

Often 1–3 days depending on base work. We book Deeside surveys alongside other jobs in Clwyd, and give you dates once the specification is agreed.

Tar and chip driveway cost in Deeside: what should I budget?

As a 2026 guide in Deeside, tar and chip driveway work runs at about £43–£71 per m² including VAT, so a 50 m² drive is roughly £2,150–£3,550. Edging, drainage and a dropped kerb are priced separately where needed.

What approvals apply in Deeside?

In Wales, new front hardstanding should be porous or drain to a permeable area within the property, and work covering 100 m² or more with drainage effects usually needs SAB approval first. Dropped kerbs are approved by the council as highway authority.

Also in Deeside

Tell us what you have in mind for Deeside and we'll book a survey and put the specification in writing.

Free survey for new surfacing

Tar and chip driveways in Deeside: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price