Driveways and paths · Buckinghamshire

Tar and chip driveways in Milton Keynes

Planning a tar and chip driveway in Milton Keynes? We'll measure up, look at the edges and drainage, and set the specification out in writing before you commit to anything.

MILTON KEYNES GUIDE£50–£82 per m² inc VAT
Tar and chip driveway with golden chippings leading to a country cottage, typical of tar and chip driveway work

How much should I budget in Milton Keynes?

These Milton Keynes guide prices reflect rates in the South East, about 10% above our UK midpoint.

ItemGuide price (inc VAT)
Tar and chip drive with a new sub-base£50–£82 per m²
Example: 50 m² drive£2,500–£4,100
Example: 100 m² drive£4,950–£8,250
Example: 200 m² drive£9,400–£15,700

As a 2026 guide in Milton Keynes, tar and chip driveway work runs at about £50–£82 per m² including VAT, so a 200 m² drive is roughly £9,400–£15,700. Guide only; the survey confirms a fixed price.

Where we work in and around Milton Keynes

What applies in Milton Keynes. We cover Milton Keynes as part of our regular Buckinghamshire rounds.

Postcodes
MK9, MK6, MK13, MK14, MK15, MK5, MK8, MK10
Area
Buckinghamshire
Nearest towns
Newport Pagnell (3 miles), Bletchley (3 miles), Leighton Buzzard (10 miles), Ampthill (11 miles)
Pricing
South East, about 10% above our UK midpoint
Kerb approvals
The highway authority

Nearby, we work in Newport Pagnell, Bletchley, Leighton Buzzard, Ampthill, Kempston.

How it is built

Dressingchippings rolled into bitumenBindersprayed bitumen or emulsionBaseMOT Type 1 or existing sound surfaceEdgeskerbs, setts or cobblesINDICATIVE CROSS-SECTION · NOT TO SCALE

What is included in a tar and chip driveway?

Hot bitumen sprayed and dressed with rolled stone chippings for a gravel look that stays put.

  • Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
  • Edges set with kerbs, setts or cobbles
  • Hot bitumen or emulsion sprayed evenly
  • Rolled to bed the stones in
  • Second coat where a double dressing is specified

Do I need permission in Milton Keynes?

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

Milton Keynes: common questions

What approvals apply in Milton Keynes?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Will someone visit before I get a fixed price in Milton Keynes?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How long does a tar and chip driveway take in Milton Keynes?

Often 1–3 days depending on base work. We book Milton Keynes surveys alongside other jobs in Buckinghamshire, and give you dates once the specification is agreed.

What is the price of a tar and chip driveway in Milton Keynes?

As a 2026 guide in Milton Keynes, tar and chip driveway work runs at about £50–£82 per m² including VAT, so a 200 m² drive is roughly £9,400–£15,700. Edging, drainage and a dropped kerb are priced separately where needed.

More we do in Milton Keynes

Tell us what you have in mind for Milton Keynes and we'll book a survey and put the specification in writing.

Free survey for new surfacing

Tar and chip driveways in Milton Keynes: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price