Tar and chip driveways in Aylesbury

Tar and chip driveway prices in Aylesbury

Guide prices below are for Aylesbury, adjusted for the South East, where surfacing rates run about 10% above our UK midpoint.

Item	Guide price (inc VAT)
Tar and chip drive with a new sub-base	£50–£82 per m²
Example: 50 m² drive	£2,500–£4,100
Example: 100 m² drive	£4,950–£8,250
Example: 200 m² drive	£9,400–£15,700

As a 2026 guide in Aylesbury, tar and chip driveway work runs at about £50–£82 per m² including VAT, so a 200 m² drive is roughly £9,400–£15,700. Guide only; the survey confirms a fixed price.

Rules that apply in Aylesbury

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

How it is built

What the price covers

Tar and chip, also called surface dressing, is a layer of bitumen sprayed onto a prepared base and immediately covered with stone chippings, which are rolled in so the surface looks like gravel but behaves like a bound drive.

Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
Edges set with kerbs, setts or cobbles
Hot bitumen or emulsion sprayed evenly
Chippings spread straight onto the binder
Rolled to bed the stones in

Covering Aylesbury

Survey cover and pricing for Aylesbury. Aylesbury sits 16 miles from Milton Keynes, within our regular Buckinghamshire cover.

Postcodes: HP20, HP19, HP21, HP22, HP17
Area: Buckinghamshire
Nearest towns: Leighton Buzzard (10 miles), Berkhamsted (11 miles), Chesham (12 miles), Bletchley (13 miles)
Pricing: South East, about 10% above our UK midpoint
Kerb approvals: The highway authority

We also cover nearby Leighton Buzzard, Berkhamsted, Chesham, Bletchley, High Wycombe.

Your questions answered

How much does a tar and chip driveway cost in Aylesbury?

As a 2026 guide in Aylesbury, tar and chip driveway work runs at about £50–£82 per m² including VAT, so a 200 m² drive is roughly £9,400–£15,700. Edging, drainage and a dropped kerb are priced separately where needed.

How long does a tar and chip driveway take in Aylesbury?

Often 1–3 days depending on base work. We book Aylesbury surveys alongside other jobs in Buckinghamshire, and give you dates once the specification is agreed.

What approvals apply in Aylesbury?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Which Aylesbury postcodes do you cover?

We cover Aylesbury including HP20, HP19, HP21, HP22, HP17, and nearby Leighton Buzzard, Berkhamsted, Chesham.

Also in Aylesbury

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Aylesbury.