Tar and chip driveways in Ayr
Tar and chip driveways in Ayr start with the parts you won't see: how deep the ground is dug, how much stone goes back in, and where the rain will run once the drive is sealed.

Tar and chip driveway prices in Ayr
For Ayr, we apply the Scottish rate, about 2% below our UK midpoint. Your survey turns these ranges into a fixed price.
| Item | Guide price (inc VAT) |
|---|---|
| Tar and chip drive with a new sub-base | £44–£74 per m² |
| Example: 50 m² drive | £2,200–£3,700 |
| Example: 100 m² drive | £4,400–£7,350 |
| Example: 200 m² drive | £8,400–£13,950 |
As a 2026 guide in Ayr, tar and chip driveway work runs at about £44–£74 per m² including VAT, so a 100 m² drive is roughly £4,400–£7,350. Guide only; the survey confirms a fixed price.
Layer by layer
Rules that apply in Ayr
In Scotland, permitted development allows a hard surface between a house and a road only if it is porous or the water drains to a porous area within the property. Unlike England there is no 5 m² allowance, so it applies to any size. Conservation areas and the grounds of listed buildings have extra restrictions. The council, as roads authority, controls any new or widened access across a footway.
Covering Ayr
What applies in Ayr. We reach Ayr on our Ayrshire survey days; Kilmarnock is 12 miles away.
- Postcodes
- KA7
- Area
- Ayrshire
- Nearest towns
- Prestwick (2 miles), Troon (6 miles), Irvine (11 miles), Kilmarnock (12 miles)
- Pricing
- Scotland, about 2% below our UK midpoint
- Kerb approvals
- The council
The same service is available in Prestwick, Troon, Irvine, Kilmarnock, Stevenston.
What is included in a tar and chip driveway?
Tar and chip, also called surface dressing, is a layer of bitumen sprayed onto a prepared base and immediately covered with stone chippings, which are rolled in so the surface looks like gravel but behaves like a bound drive.
- Edges set with kerbs, setts or cobbles
- Hot bitumen or emulsion sprayed evenly
- Rolled to bed the stones in
- Loose surplus chippings swept up after a few days
- Second coat where a double dressing is specified
Your questions answered
How quickly can work start in Ayr?
Often 1–3 days depending on base work. We book Ayr surveys alongside other jobs in Ayrshire, and give you dates once the specification is agreed.
What is the price of a tar and chip driveway in Ayr?
As a 2026 guide in Ayr, tar and chip driveway work runs at about £44–£74 per m² including VAT, so a 100 m² drive is roughly £4,400–£7,350. Edging, drainage and a dropped kerb are priced separately where needed.
Do you cover all of Ayr?
We cover Ayr including KA7, and nearby Prestwick, Troon, Irvine.
Can I get a free survey in Ayr?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
Other work in Ayr
- Tarmac driveway repairs
- Car park surfacing
- Red tarmac driveways
- Car park resurfacing
- Permeable tarmac driveways
- Private and access road surfacing
- Everything in Ayr
Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Ayr.
Tar and chip driveways in Ayr: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED