Driveways and paths · West Yorkshire

Red tarmac driveways in Bradford

Every red tarmac driveway we price in Bradford comes with a written specification, so the dig depth, sub-base, binder course and surface course are on paper before anything is agreed.

BRADFORD GUIDE£72–£110 per m² inc VAT
Red tarmac front driveway with a charcoal block edge outside a Victorian house, typical of red tarmac driveway work

Red tarmac driveway prices in Bradford

Guide prices below are for Bradford, adjusted for Yorkshire and the Humber, where surfacing rates run about 4% below our UK midpoint.

ItemGuide price (inc VAT)
Red tarmac drive, full dig-out and new sub-base£72–£110 per m²
Example: 30 m² drive£2,400–£3,650
Example: 50 m² drive£3,600–£5,500
Example: 80 m² drive£5,750–£8,850

As a 2026 guide in Bradford, red tarmac driveway work runs at about £72–£110 per m² including VAT, so a 50 m² drive is roughly £3,600–£5,500. Guide only; the survey confirms a fixed price.

Layer by layer

Surface course20–30 mm red pigmented AC 6Binder course50–60 mm black AC 20Sub-baseabout 150 mm MOT Type 1Edgescharcoal blocks or kerbsINDICATIVE CROSS-SECTION · NOT TO SCALE

Rules that apply in Bradford

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

Where we work in and around Bradford

The key facts for Bradford. Bradford is one of the bigger places we cover in West Yorkshire, so survey slots come round regularly.

Postcodes
BD1, BD3, BD5, BD8, BD7, BD2, BD4, BD6
Area
West Yorkshire
Nearest towns
Shipley (3 miles), Pudsey (4 miles), Baildon (4 miles), Cleckheaton (5 miles)
Pricing
Yorkshire and the Humber, about 4% below our UK midpoint
Kerb approvals
The highway authority

Close to Bradford: Shipley, Pudsey, Baildon, Cleckheaton, Bingley.

What is included in a red tarmac driveway?

Pigmented red asphalt on the same full build, often framed with a charcoal block border.

  • Full dig-out and MOT Type 1 sub-base, about 150 mm
  • Black AC 20 binder course, about 50–60 mm
  • Contrasting block or kerb border as edge restraint
  • Colour sample discussed before ordering
  • Falls and drainage set as for any new drive

Bradford: common questions

Do you work in my part of Bradford?

We cover Bradford including BD1, BD3, BD5, BD8, BD7, BD2, and nearby Shipley, Pudsey, Baildon.

How long does a red tarmac driveway take in Bradford?

Usually 2–4 working days. We book Bradford surveys alongside other jobs in West Yorkshire, and give you dates once the specification is agreed.

What is the price of a red tarmac driveway in Bradford?

As a 2026 guide in Bradford, red tarmac driveway work runs at about £72–£110 per m² including VAT, so a 50 m² drive is roughly £3,600–£5,500. Edging, drainage and a dropped kerb are priced separately where needed.

Is the survey in Bradford free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

More we do in Bradford

Tell us what you have in mind for Bradford and we'll book a survey and put the specification in writing.

Free survey for new surfacing

Red tarmac driveways in Bradford: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price