Driveways and paths · West Midlands

Red tarmac driveways in Aldridge

A good red tarmac driveway in Aldridge looks the same as a poor one on the day it is laid. The difference shows a few winters later, which is why our quotes list what goes underneath.

ALDRIDGE GUIDE£75–£115 per m² inc VAT
Red tarmac front driveway with a charcoal block edge outside a Victorian house, typical of red tarmac driveway work

Red tarmac driveway prices in Aldridge

Guide prices below are for Aldridge, adjusted for the West Midlands, where surfacing rates run in line with our UK midpoint.

ItemGuide price (inc VAT)
Red tarmac drive, full dig-out and new sub-base£75–£115 per m²
Example: 30 m² drive£2,500–£3,800
Example: 50 m² drive£3,750–£5,750
Example: 80 m² drive£6,000–£9,200

As a 2026 guide in Aldridge, red tarmac driveway work runs at about £75–£115 per m² including VAT, so a 50 m² drive is roughly £3,750–£5,750. Guide only; the survey confirms a fixed price.

Planning and kerb rules for Aldridge

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

What the price covers

Red tarmac is ordinary asphalt with a red pigment, and often red aggregate, in the surface course, laid on the same sub-base and binder course as a black tarmac drive.

  • Full dig-out and MOT Type 1 sub-base, about 150 mm
  • Black AC 20 binder course, about 50–60 mm
  • Red pigmented surface course, about 20–30 mm
  • Contrasting block or kerb border as edge restraint
  • Falls and drainage set as for any new drive

Layer by layer

Surface course20–30 mm red pigmented AC 6Binder course50–60 mm black AC 20Sub-baseabout 150 mm MOT Type 1Edgescharcoal blocks or kerbsINDICATIVE CROSS-SECTION · NOT TO SCALE

Aldridge: the local details

What applies in Aldridge. We cover Aldridge by grouping surveys with nearby West Midlands jobs; Birmingham is 9 miles away.

Postcodes
WS9, WS4
Area
West Midlands
Nearest towns
Walsall (3 miles), Bloxwich (4 miles), Sutton Coldfield (5 miles), Burntwood (5 miles)
Pricing
West Midlands, in line with our UK midpoint
Kerb approvals
The highway authority

Close to Aldridge: Walsall, Bloxwich, Sutton Coldfield, Burntwood, Great Wyrley.

Questions about red tarmac driveways in Aldridge

How long does a red tarmac driveway take in Aldridge?

Usually 2–4 working days. We book Aldridge surveys alongside other jobs in the West Midlands, and give you dates once the specification is agreed.

Will someone visit before I get a fixed price in Aldridge?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How much does a red tarmac driveway cost in Aldridge?

As a 2026 guide in Aldridge, red tarmac driveway work runs at about £75–£115 per m² including VAT, so a 50 m² drive is roughly £3,750–£5,750. Edging, drainage and a dropped kerb are priced separately where needed.

Are there planning or highway rules in Aldridge?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

More we do in Aldridge

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Aldridge.

Free survey for new surfacing

Red tarmac driveways in Aldridge: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price