Red tarmac driveways in Swansea
Planning a red tarmac driveway in Swansea? We'll measure up, look at the edges and drainage, and set the specification out in writing before you commit to anything.

What does a red tarmac driveway cost in Swansea?
Local guide rates for Swansea (Wales, about 5% below our UK midpoint):
| Item | Guide price (inc VAT) |
|---|---|
| Red tarmac drive, full dig-out and new sub-base | £71–£109 per m² |
| Example: 30 m² drive | £2,350–£3,600 |
| Example: 50 m² drive | £3,550–£5,450 |
| Example: 80 m² drive | £5,700–£8,750 |
As a 2026 guide in Swansea, red tarmac driveway work runs at about £71–£109 per m² including VAT, so a 50 m² drive is roughly £3,550–£5,450. Guide only; the survey confirms a fixed price.
Where we work in and around Swansea
The key facts for Swansea. As one of the larger towns in West Glamorgan, Swansea sees regular survey visits.
- Postcodes
- SA1, SA5, SA2, SA3
- Area
- West Glamorgan
- Nearest towns
- Clydach (5 miles), Briton Ferry (5 miles), Gorseinon (5 miles), Neath (7 miles)
- Pricing
- Wales, about 5% below our UK midpoint
- Kerb approvals
- The council
The same service is available in Clydach, Briton Ferry, Gorseinon, Neath, Pontarddulais.
How it is built
What the price covers
Pigmented red asphalt on the same full build, often framed with a charcoal block border.
- Full dig-out and MOT Type 1 sub-base, about 150 mm
- Black AC 20 binder course, about 50–60 mm
- Red pigmented surface course, about 20–30 mm
- Contrasting block or kerb border as edge restraint
- Colour sample discussed before ordering
Planning and kerb rules for Swansea
In Wales, new front hardstanding should be porous or drain to a permeable area within the property, and work covering 100 m² or more with drainage effects usually needs SAB approval first. A vehicle crossing over the footway is a separate approval, from the council as highway authority.
Questions about red tarmac driveways in Swansea
What is the price of a red tarmac driveway in Swansea?
As a 2026 guide in Swansea, red tarmac driveway work runs at about £71–£109 per m² including VAT, so a 50 m² drive is roughly £3,550–£5,450. Edging, drainage and a dropped kerb are priced separately where needed.
Are there planning or highway rules in Swansea?
In Wales, new front hardstanding should be porous or drain to a permeable area within the property, and work covering 100 m² or more with drainage effects usually needs SAB approval first. Dropped kerbs are approved by the council as highway authority.
Will someone visit before I get a fixed price in Swansea?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
Do you cover all of Swansea?
We cover Swansea including SA1, SA5, SA2, SA3, and nearby Clydach, Briton Ferry, Gorseinon.
More we do in Swansea
- Permeable tarmac driveways
- Private and access road surfacing
- Front garden to tarmac driveway
- Tarmac driveway resurfacing
- Tar and chip driveways
- Tarmac driveway repairs
- Everything in Swansea
Tell us what you have in mind for Swansea and we'll book a survey and put the specification in writing.
Red tarmac driveways in Swansea: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED