Driveways and paths · Rutland

Red tarmac driveways in Oakham

If you are weighing up red tarmac driveways in Oakham, the useful questions are about depth, edges and drainage. That's what our survey checks and what your quote spells out.

OAKHAM GUIDE£74–£113 per m² inc VAT
Red tarmac front driveway with a charcoal block edge outside a Victorian house, typical of red tarmac driveway work

How much should I budget in Oakham?

Local guide rates for Oakham (the East Midlands, about 2% below our UK midpoint):

ItemGuide price (inc VAT)
Red tarmac drive, full dig-out and new sub-base£74–£113 per m²
Example: 30 m² drive£2,450–£3,700
Example: 50 m² drive£3,700–£5,650
Example: 80 m² drive£5,900–£9,000

As a 2026 guide in Oakham, red tarmac driveway work runs at about £74–£113 per m² including VAT, so a 50 m² drive is roughly £3,700–£5,650. Guide only; the survey confirms a fixed price.

Oakham: the local details

Oakham at a glance. We cover Oakham by grouping surveys with nearby Rutland jobs; Oakham is under a mile away.

Postcodes
LE15
Area
Rutland
Nearest towns
Melton Mowbray (9 miles), Stamford (11 miles), Corby (12 miles)
Pricing
East Midlands, about 2% below our UK midpoint
Kerb approvals
The highway authority

We also cover nearby Melton Mowbray, Stamford, Corby.

What the price covers

Red tarmac is ordinary asphalt with a red pigment, and often red aggregate, in the surface course, laid on the same sub-base and binder course as a black tarmac drive.

  • Full dig-out and MOT Type 1 sub-base, about 150 mm
  • Black AC 20 binder course, about 50–60 mm
  • Red pigmented surface course, about 20–30 mm
  • Contrasting block or kerb border as edge restraint
  • Falls and drainage set as for any new drive

Do I need permission in Oakham?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

How it is built

Surface course20–30 mm red pigmented AC 6Binder course50–60 mm black AC 20Sub-baseabout 150 mm MOT Type 1Edgescharcoal blocks or kerbsINDICATIVE CROSS-SECTION · NOT TO SCALE

Oakham: common questions

Do I need permission for a red tarmac driveway in Oakham?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Will someone visit before I get a fixed price in Oakham?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Which Oakham postcodes do you cover?

We cover Oakham including LE15, and nearby Melton Mowbray, Stamford, Corby.

How much does a red tarmac driveway cost in Oakham?

As a 2026 guide in Oakham, red tarmac driveway work runs at about £74–£113 per m² including VAT, so a 50 m² drive is roughly £3,700–£5,650. Edging, drainage and a dropped kerb are priced separately where needed.

Other work in Oakham

Tell us what you have in mind for Oakham and we'll book a survey and put the specification in writing.

Free survey for new surfacing

Red tarmac driveways in Oakham: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price