Driveways and paths · Leicestershire

Red tarmac driveways in Coalville

If you are weighing up red tarmac driveways in Coalville, the useful questions are about depth, edges and drainage. That's what our survey checks and what your quote spells out.

COALVILLE GUIDE£74–£113 per m² inc VAT
Red tarmac front driveway with a charcoal block edge outside a Victorian house, typical of red tarmac driveway work

Red tarmac driveway prices in Coalville

These Coalville guide prices reflect rates in the East Midlands, about 2% below our UK midpoint.

ItemGuide price (inc VAT)
Red tarmac drive, full dig-out and new sub-base£74–£113 per m²
Example: 30 m² drive£2,450–£3,700
Example: 50 m² drive£3,700–£5,650
Example: 80 m² drive£5,900–£9,000

As a 2026 guide in Coalville, red tarmac driveway work runs at about £74–£113 per m² including VAT, so a 50 m² drive is roughly £3,700–£5,650. Guide only; the survey confirms a fixed price.

Coalville: the local details

Survey cover and pricing for Coalville. Coalville is 12 miles from Leicester, and we survey there as part of Leicestershire cover.

Postcodes
LE67
Area
Leicestershire
Nearest towns
Loughborough (8 miles), Swadlincote (9 miles), Mountsorrel (9 miles), Earl Shilton (10 miles)
Pricing
East Midlands, about 2% below our UK midpoint
Kerb approvals
The highway authority

The same service is available in Loughborough, Swadlincote, Mountsorrel, Earl Shilton, Braunstone.

Do I need permission in Coalville?

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

Layer by layer

Surface course20–30 mm red pigmented AC 6Binder course50–60 mm black AC 20Sub-baseabout 150 mm MOT Type 1Edgescharcoal blocks or kerbsINDICATIVE CROSS-SECTION · NOT TO SCALE

What we do on a red tarmac driveway

Pigmented red asphalt on the same full build, often framed with a charcoal block border.

  • Black AC 20 binder course, about 50–60 mm
  • Red pigmented surface course, about 20–30 mm
  • Contrasting block or kerb border as edge restraint
  • Colour sample discussed before ordering
  • Falls and drainage set as for any new drive

Coalville: common questions

Will someone visit before I get a fixed price in Coalville?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

What is the price of a red tarmac driveway in Coalville?

As a 2026 guide in Coalville, red tarmac driveway work runs at about £74–£113 per m² including VAT, so a 50 m² drive is roughly £3,700–£5,650. Edging, drainage and a dropped kerb are priced separately where needed.

Do you work in my part of Coalville?

We cover Coalville including LE67, and nearby Loughborough, Swadlincote, Mountsorrel.

What approvals apply in Coalville?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Also in Coalville

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Coalville.

Free survey for new surfacing

Red tarmac driveways in Coalville: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price