Driveways and paths · Lancashire

Red tarmac driveways in Burnley

Every red tarmac driveway we price in Burnley comes with a written specification, so the dig depth, sub-base, binder course and surface course are on paper before anything is agreed.

BURNLEY GUIDE£73–£112 per m² inc VAT
Red tarmac front driveway with a charcoal block edge outside a Victorian house, typical of red tarmac driveway work

What does a red tarmac driveway cost in Burnley?

For Burnley, we apply the North West rate, about 3% below our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
Red tarmac drive, full dig-out and new sub-base£73–£112 per m²
Example: 30 m² drive£2,400–£3,700
Example: 50 m² drive£3,650–£5,600
Example: 80 m² drive£5,800–£8,900

As a 2026 guide in Burnley, red tarmac driveway work runs at about £73–£112 per m² including VAT, so a 50 m² drive is roughly £3,650–£5,600. Guide only; the survey confirms a fixed price.

Burnley: the local details

Survey cover and pricing for Burnley. As one of the larger towns in Lancashire, Burnley sees regular survey visits.

Postcodes
BB10, BB11, BB12
Area
Lancashire
Nearest towns
Nelson (3 miles), Colne (5 miles), Accrington (6 miles), Rawtenstall (7 miles)
Pricing
North West, about 3% below our UK midpoint
Kerb approvals
The highway authority

The same service is available in Nelson, Colne, Accrington, Rawtenstall, Haslingden.

What is included in a red tarmac driveway?

Red tarmac is ordinary asphalt with a red pigment, and often red aggregate, in the surface course, laid on the same sub-base and binder course as a black tarmac drive.

  • Full dig-out and MOT Type 1 sub-base, about 150 mm
  • Black AC 20 binder course, about 50–60 mm
  • Red pigmented surface course, about 20–30 mm
  • Contrasting block or kerb border as edge restraint
  • Falls and drainage set as for any new drive

Rules that apply in Burnley

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

Burnley: common questions

Do you cover all of Burnley?

We cover Burnley including BB10, BB11, BB12, and nearby Nelson, Colne, Accrington.

Can I get a free survey in Burnley?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How long does a red tarmac driveway take in Burnley?

Usually 2–4 working days. We book Burnley surveys alongside other jobs in Lancashire, and give you dates once the specification is agreed.

Do I need permission for a red tarmac driveway in Burnley?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

More we do in Burnley

Ready for a price in Burnley? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

Red tarmac driveways in Burnley: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price